TELEMAC-MASCARET Forum: SOLID DISCHARGES DIFFERENT GRAIN DIAMETER (1/1)

Welcome, Guest

TOPIC: SOLID DISCHARGES DIFFERENT GRAIN DIAMETER

SOLID DISCHARGES DIFFERENT GRAIN DIAMETER 7 years 7 months ago #25867

jose2kk OFFLINE Expert Boarder Posts: 161 Thank you received: 59	Hi everyone, I would like to set a solids discharge at inlet in a channel with a different size than bottom sediment, it means two classes, how could i do this? is this possible? Thanks in advance, Cheers, José
	The administrator has disabled public write access.

SOLID DISCHARGES DIFFERENT GRAIN DIAMETER 7 years 7 months ago #25879

flanagan
OFFLINE
Fresh Boarder
Posts: 28
Thank you received: 8

Hi you can had a "LIQUID BOUNDARIES FILE" and prescribe what ever you want.

exemple of liquid boundaries:
#
# CONCENTRATION EN ENTREE
#
T CG(2,1) CG(2,2) CG(2,3) CG(2,4) CG(2,5) CG(2,6) CG(2,7) CG(2,8) CG(2,9) CG(2,10)
s g/l g/l g/l g/l g/l g/l g/l g/l g/l g/l
0 0 0 0 0 0 0 0 1.33E-03 1.33E-03 1.33E-03
900 0 0 0 0 0 0 0 1.33E-03 1.33E-03 1.33E-03
1800 0 0 0 0 0 0 0 1.33E-03 1.33E-03 1.33E-03
2700 0 0 0 0 0 0 0 1.34E-03 1.34E-03 1.34E-03
3600 0 0 0 0 0 0 0 1.36E-03 1.36E-03 1.36E-03
4500 0 0 0 0 0 0 0 1.37E-03 1.37E-03 1.37E-03
5400 0 0 0 0 0 0 0 1.37E-03 1.37E-03 1.37E-03

=> Ten classes of sediments on the boundary two are precribe

The code have been modified a little bit to do that ... but the idea is here ...

cheers

Jeremy

The administrator has disabled public write access.

The following user(s) said Thank You: jose2kk