Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
System Modules
GAIA / SISYPHE
Boundary Conditions in SISYPHE
Flat Threaded

TOPIC: Boundary Conditions in SISYPHE

Boundary Conditions in SISYPHE 4 years 9 months ago #35326

Dear colleagues,

I have a river model case when I am using TELEMAC coupled with SISYPHE in version v8p0r2 with a doubt about how to set boundary conditions in the .cli file. Since I don't have and want to use prescribed bedload discharges, what should be the LIEBOR and LIQBOR in the inlet and outlet boundaries?

Thank you.

Kind regards.
The administrator has disabled public write access.

Boundary Conditions in SISYPHE 4 years 9 months ago #35328

  • amanj2013
  • amanj2013's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 211
  • Thank you received: 24
Hello,

Pls have a look at the Sisyphe user manual for example V8p1 and explained quite well.

Here I attached a section of it. For example, if you want to impose the intel boundary condition to prescribed bedload then for LIQBOR set to 5 and you can do this using any text editor such as Notepad++, and for the outlet you can set as free with 4 if you don't have measurements, otherwise 5. Similar to the other values.

AMANJ
Attachments:
The administrator has disabled public write access.
The following user(s) said Thank You: CUSIPUMA AYUQUE
Flat Threaded
Moderators: Pablo, pavans
Forum
System Modules
GAIA / SISYPHE
Boundary Conditions in SISYPHE

The open TELEMAC-MASCARET template for Joomla!2.5, the HTML 4 version.