TELEMAC-MASCARET Forum: .MED mesh in Telemac ？ (2/2)

Welcome, Guest

Page:
1
2

TOPIC: .MED mesh in Telemac ？

.MED mesh in Telemac ？ 4 years 1 month ago #36913

yugi OFFLINE openTELEMAC Guru Posts: 851 Thank you received: 244	Ok this is reassuring. Could you post you configuration file and environment file as well as the command you are using to run the case ?
	There are 10 types of people in the world: those who understand binary, and those who don't. The administrator has disabled public write access. The following user(s) said Thank You: Gareth

.MED mesh in Telemac ？ 4 years 1 month ago #36918

Gareth OFFLINE Junior Boarder Posts: 46	Hello yugi Here are my configure file and environment file, (Hope this is what you want. I'm a novice on Ubuntu system ). File Attachment: File Name: bashrc.txt File Size: 5 KB File Attachment: File Name: systel.ubuntu.cfg File Size: 2 KB I use the command 'telemac3d.py t3d_lock-exchange.case --ncsize 4' to run this case. Best wishes Gareth
	The administrator has disabled public write access.

.MED mesh in Telemac ？ 4 years 1 month ago #36920

yugi OFFLINE openTELEMAC Guru Posts: 851 Thank you received: 244	It looks ok. just to be sure could you run compile_telemac.py --clean And try again to run the lock exchange example. If it still does not work can you try running telemac2d/gouttedo/t2d_gouttedo.cas (Adding the keyword RESULTS FILE FORMAT : MED) To see if it works.
	There are 10 types of people in the world: those who understand binary, and those who don't. The administrator has disabled public write access. The following user(s) said Thank You: Gareth

.MED mesh in Telemac ？ 4 years 1 month ago #36923

Gareth
OFFLINE
Junior Boarder
Posts: 46

Hello yugi

When I run the command 'compile_telemac.py --clean', although there were some warnings in terminal, the compilation was successful ended with 'My work is done'.

But the lock exchange example still doesn't work with the same error message, when I run the command
telemac3d.py t3d_lock-exchange.cas --ncsize 4

File Attachment:

File Name: lock-4_cores.txt
File Size: 8 KB

When running the case with a single core (without '--ncsize 4'), a new error message appears

File Attachment:

File Name: lock-single_core.txt
File Size: 24 KB

I also run the case telemac2d/gouttedo/t2d_gouttedo.cas, and add the keyword 'RESULTS FILE FORMAT : MED' in the file, but the running all failed for 4 cores and single cores. Here are log files.

log file for running command with '--ncsize 4':

File Attachment:

File Name: gouttedo-4_cores.txt
File Size: 23 KB

without '--ncsize 4'

File Attachment:

File Name: gouttedo-single_cores.txt
File Size: 19 KB

Besides, I run the case ‘’gouttedo‘ without adding the keyword，It works well.

All regards

Gareth

The administrator has disabled public write access.

.MED mesh in Telemac ？ 4 years 1 month ago #36953

yugi OFFLINE openTELEMAC Guru Posts: 851 Thank you received: 244	Hi, Sorry for the late reply I was busy with the release of the latest version of Telemac. Ok I think i got it. You need to add -DHAVE_MED4 in your configuration file that is something I completely forgot about. Hopefully that should solve your issue.
	There are 10 types of people in the world: those who understand binary, and those who don't. The administrator has disabled public write access. The following user(s) said Thank You: Gareth

.MED mesh in Telemac ？ 4 years 1 month ago #36954

Gareth OFFLINE Junior Boarder Posts: 46	Hi yugi Thanks for your kindly reply！Good news is never too late I will try it later, and give a feedback on whether it works. Best wishes! Gareth
	The administrator has disabled public write access.

.MED mesh in Telemac ？ 4 years 1 month ago #36969

Gareth OFFLINE Junior Boarder Posts: 46	Hi yugi This method works, and the case "lock-exchange" runs successfully. Thank you for your help! All regards. Gareth
	The administrator has disabled public write access.