open TELEMAC-MASCARET The mathematically superior suite of solvers

- I create a new close line inside the region where elevation date is available

Please double click on the new data object in the workspace to bring up the Properties dialog box and then click on the Data tab. Then take a screen snapshot of the Attributes and the Min/Max values and share it.

Thanks,
Alan

After making some internal changes, I now see the following expected values on the nodes of a closed line and the correct Value min/max values in the data tab.



I'll now look at the next step in your process.

Kindly,
Alan

- I open my bathy file in xyz format. The point cloud is correctly imported
- I create a new close line inside the region where elevation date is available
- I generate a new t3 mesh generator
- I Define the Outline (Value) by dragging the above-created closeline and run the mesh
- the created mesh(Node Type) is correct

In my example, I see that the NoteType attribute is type "oneof". For you, are the min/max values in the Data tab correct? And is the ColourScale tab correct?



I'll wait until you confirm that we are on the same page up until this point and that everything looks ok for you.

Thanks,
Alan

Hi,

I'm exactly on the same page and everything seems ok so far.



Regards

Florent

Thanks for the confirmation! I just noticed that some metadata was missing in my text.xyz data object. Now fixed and also I added mean and standard deviation for X,Y and Z while I was in there



Marching on...

Kindly,
Alan

I've modified the XYZ PointSet popup so that Z is not repeated.
- And if you use Edit > Add Attribute... then that attribute's name will appear in the popup too
- And if you use Edit > Delete Attribute... then X, Y and Z will not be allowed to be deleted



Marching on...

Kindly,
Alan

With all of these internal changes, I checked saving and loading from a file for the XYZ PointSet. Had to make a small fix; so all should be good again for that.

Marching on...

Kindly,
Alan

I fixed the missing T3 Mesh Generator metadata.

AND, I fixed the ColourScale for the T3 Mesh when the attribute has type "oneof".

LEFT: The incorrect colour scale for the 8 types of node.
RIGHT: The corrected colour scale for the 8 types of node.

NOTE: The default outline colour will now be a light blue and the interior node colour will be a dark blue. You can click on the colour patch and change the colour to anything that you want. In this example, I change Outline=1 to the colour RED.



Marching on...

Alan

- With the mesh highlighted i go to the tools map object and select the new interpolator
- The mesh become Mesh (Required new attribute)
- The mesh is completely monochrome (red), the elevation interpolation has not been successful. The value of the attribute is the no data value -999.

The 2D Interpolator now seems to be working with a T3 Mesh.



Sorry for the troubles! BK 3.12.3-alpha will have this fix.

Kindly,
Alan

Hi,
Thanks you very much for the job !

I'm waiting for the new version :)

Best regards

Florent