TELEMAC-MASCARET Forum: A FINE mesh generator in order of 1cm? (1/1)

Welcome, Guest

TOPIC: A FINE mesh generator in order of 1cm?

A FINE mesh generator in order of 1cm? 8 years 8 months ago #19888

gasha.sh

Dear all,
I'm modeling an open channel with 2 banks with about 2m of diameter with Telemac2D. With a mesh of 10cm the results are not precise comparing to the measured data. By some theorical calculations, I recognized that the problem could be the geometrical and so the mesh size. I tried to make a very fine tiangular mesh about 1cm distance between nodes with the BK, but maybe due to the graphical interface, the mesh is not appropriate (cf. Photo attched).
Could any body please help me is there any other (free) software to create more fine meshes that are compatible with Telemac2D?

Thanks in adavence,
Gashin

Attachments:

Sanstitre.jpg (103KB)

The administrator has disabled public write access.

A FINE mesh generator in order of 1cm? 8 years 8 months ago #19889

abernard OFFLINE Expert Boarder Posts: 210 Thank you received: 45	Hi Gashin, Please see posts 11884 and 6901 and other... Switch to local coordinates if you want 10-2m accuracy.
	The administrator has disabled public write access. The following user(s) said Thank You: gasha.sh