# Automatic calibration **URL:** \ **Category:** TELEMAC-3D\ **Created:** [May 11, 2025, 11:37am UTC](https://opentelemac.org/forum/t/automatic-calibration/8005 "2025-05-11T11:37:30Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![user\_18187](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/f6c823/32.png) [@user\_18187](https://opentelemac.org/forum/u/user_18187)\ **Post date:** [May 11, 2025, 11:37am UTC](https://opentelemac.org/forum/t/automatic-calibration/8005/1 "2025-05-11T11:37:30Z")
Hello, everyone. I’m a new TELEMAC user and I’m using the 3D module in my thesis. I intend to perform some sort of automatic calibration of the hydrodynamic part of TELEMAC-3D, and I have a few questions regarding this. Has anyone here on the forum already performed automatic calibration, using some algorithm, for the hydrodynamic module (or any other module)? Is this actually feasible? If anyone has done it and could share a code that I can use as a reference to build my own, or would be open to discussing the topic, I would be very grateful. If not, is it possible to access the source code of the hydrodynamic module? I searched here on the forum and on the official website, but the only place that seemed to lead to some code is not working. Thank you very much in advance for your help. ---
**Author:** ![user\_10274](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/a88e57/32.png) [@user\_10274](https://opentelemac.org/forum/u/user_10274)\ **Post date:** [May 27, 2025, 8:06am UTC](https://opentelemac.org/forum/t/automatic-calibration/8005/2 "2025-05-27T08:06:10Z")
Hi, Actually not in 3D but in 2D. You can take a look at this article [Article](https://henry.baw.de/server/api/core/bitstreams/90d4a7a8-5467-48d7-8500-e78bb455ef6a/content) Best regards,