# coupling tomawac telemac

**URL:** <https://opentelemac.org/forum/t/coupling-tomawac-telemac/5295>\
**Category:** TOMAWAC\
**Created:** [November 14, 2018, 11:06pm UTC](https://opentelemac.org/forum/t/coupling-tomawac-telemac/5295 "2018-11-14T23:06:40Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![user\_97](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/e68b1a/32.png) [@user\_97](https://opentelemac.org/forum/u/user_97)\
**Post date:** [July 29, 2019, 8:42am UTC](https://opentelemac.org/forum/t/coupling-tomawac-telemac/5295/21 "2019-07-29T08:42:56Z")

</div>

Before trying to couple both models, what about your Tomawac model alone, is it running?

Current/water level files are used for offline coupling, you don’t need to provide it here as you want to run an inline coupled simulation.

Everything is well explained in the tomawac user manual, please read it before posting.

[name removed]

---

<div class="post-metadata">

**Author:** ![user\_13433](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/d2c977/32.png) [@user\_13433](https://opentelemac.org/forum/u/user_13433)\
**Post date:** [July 29, 2019, 8:53am UTC](https://opentelemac.org/forum/t/coupling-tomawac-telemac/5295/22 "2019-07-29T08:53:28Z")

</div>

just this only last post, thank you for your advice about reading the manual!

Regards

[Previous page](https://opentelemac.org/forum/t/coupling-tomawac-telemac/5295.md?page=1)