# unknown keyword 'computation continued'

**URL:** <https://opentelemac.org/forum/t/unknown-keyword-computation-continued/8061>\
**Category:** TELEMAC-2D\
**Created:** [September 24, 2025, 4:25pm UTC](https://opentelemac.org/forum/t/unknown-keyword-computation-continued/8061 "2025-09-24T16:25:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![user\_16357](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/898d66/32.png) [@user\_16357](https://opentelemac.org/forum/u/user_16357)\
**Post date:** [September 24, 2025, 4:25pm UTC](https://opentelemac.org/forum/t/unknown-keyword-computation-continued/8061/1 "2025-09-24T16:25:46Z")

</div>

Dear [name removed],

I’m building a 2D coupled model between Telemac2D and GAIA. When I run the steering file in my personal computer, which includes the keyword ‘COMPUTATION CONTINUED’, it can run successfully.

However, when I run the same steering file in super computer, it says “Unknown keyword COMPUTATION CONTINUED”. I tried to run Telemac2D without GAIA, it was still the same. But when I tried deleting COMPUTATION CONTINUED in the steering file, it could run successfully.

So, how can I run the steering file in super computer with the keyword ‘COMPUTATION CONTINUED’? Help would be greatly appreciated!

 ![unkownkeyword.png](https://opentelemac.org/uploads/default/original/2X/0/0a89feba94c17f7c8e44e528ca4d8087a56472f3.png)

---

<div class="post-metadata">

**Author:** ![user\_438](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/c77e96/32.png) [@user\_438](https://opentelemac.org/forum/u/user_438)\
**Post date:** [October 23, 2025, 5:53pm UTC](https://opentelemac.org/forum/t/unknown-keyword-computation-continued/8061/2 "2025-10-23T17:53:16Z")

</div>

Hello,

The keyword COMPUTATION CONTINUED has been deleted from release 9.0. Are you sure the release you use is not 9.0 or the main?

[name removed]

---

<div class="post-metadata">

**Author:** ![user\_16357](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/898d66/32.png) [@user\_16357](https://opentelemac.org/forum/u/user_16357)\
**Post date:** [October 27, 2025, 12:26pm UTC](https://opentelemac.org/forum/t/unknown-keyword-computation-continued/8061/3 "2025-10-27T12:26:32Z")

</div>

Hello [name removed],

Thanks for your reply. The release i’m using is V8P4r0 and you can see it in the picture.

And in my personal computer, the keywork COMPUTATION CONTINUED can be used. However my main problem is that, in Supercomputer, it says “Unknown keyword COMPUTATION CONTINUED”. I don’t if it’s a problem with the compilation.

Please,help would be greatly appreciated!

---

<div class="post-metadata">

**Author:** ![user\_438](https://opentelemac.org/forum/letter_avatar_proxy/v4/letter/u/c77e96/32.png) [@user\_438](https://opentelemac.org/forum/u/user_438)\
**Post date:** [April 26, 2026, 9:57am UTC](https://opentelemac.org/forum/t/unknown-keyword-computation-continued/8061/4 "2026-04-26T09:57:11Z")

</div>

Hello,

Sorry but the official rules are to assist only official releases: the main and the latest release: 9.1.0.

If using one of them, as this keyword was deleted, you will not have this issue for sure.

Anyway, your error usually appears if you do not run the right code with respect to the steering file or you make a typo in the name of the keyword, or your mix languages in the same steering file.

[name removed]