open TELEMAC-MASCARET The mathematically superior suite of solvers

Hi, please just ignore the previous message about keyWords problem, solved.
Thx
Josias

Hello Josias,

Your error and its solution may help other users.
Was it due to a number of columns exceeding 72?

Chi-Tuan

hi chi-tuan,

in fact I really don't know the technical aspect of the problem, but what I did to solve it is :
- I just run a previous computation with a previous fully working steering file in a previous working directory,
- copied-pasted this file in this same directory to have an in-situ copy I am gonna work with ( in-situ copy ),
- made all numerical modifications required in the copy,
- then run a short simulation,
- then changed the input files (boundary and geometric files) I did want,
- then run a short simulation,
- then copied this steering file (the in-situ copy) to the new folder I did want with the required input files (boundary,geometric, liquid boundary...),
- then run a short simulation and voila!.

I am pretty sure what I just write is not relevant, and I don't know what was wrong with the previous not working steering file but I deleted it.

sorry for not be able to be more specific.

Josias

hi
I got this error message in using the fortran file user_mesh_transf.f ,




this is the modification I made in the steering file about the mesh

FORTRAN FILE : 'jo_fortran16'

NUMBER OF HORIZONTAL LEVELS = 16

MESH TRANSFORMATION = 2


this is my fortran file



THX

JOSIAS

Hi Josias,

It has been awhile I programmed in FORTRAN, but I believe you mis a space before each line, the first character should be at position 7 and you start on 6 (replace ! by space to uncomment).

Hope that helps,
Patrick

Hi Patrick,
after the modifications the FORTRAN does work.
thx
Josias

hi everybody,
It seems that I have a recursive problem with my keywords recognition in my steering files, as I posted 4/5 messages before. even in my tomawac steering file this problem stand.
what I use to solve this time is to use FUDAA-PREPRO. I mean I just make my file as I want, knowing that It does not run the computation, I open it in fudaa and save the file via fudaa. By this way the steering file can run, but there is changes (rearrangement) in my steering file. I let you see the difference

hi everybody ,
hi CHI -TUAN ,
in the post www.opentelemac.org/index.php/kunena/21-...ement?start=10#41433 , I think you were right, the problem maybe caused by the number of columns exceeding 72.
I solved a similar problem, splitting the line in 2 or 3, by using the "Enter" button.

for example, I got 3 boundaries and 6 concentration tracers or sediments to set, so instead of having one long line



, creating errors in the computation, I have 3 lines.



also those 3 lines help me to recognize each concentration at each boundary... so more readable file.


Fudaa just tend to set confusion in my file. so each time I use it I always need to reorganize my steering file. the splitting option is better.

thx

Josias