TELEMAC-MASCARET Forum: How do I include Wind in the right way? (1/1)

Welcome, Guest

TOPIC: How do I include Wind in the right way?

How do I include Wind in the right way? 2 years 2 weeks ago #42198

Erken
OFFLINE
Fresh Boarder
Posts: 27

Hi,

when I run my Telemac model with Wind, unfortunally nothing is happening to the output. I tried it with Speed and direction of wind and also Wind velocity in my cas file, but with both runs, nothing changed.
My first question is: Is it the right way to do it?
and because nothing change my second question is:
Is there another way to include wind and is it running better with option 2?

Thank you for your help in advance and I hope I will be able to add the wind in my coastal model!

Best,

Attachments:

Second.png (4KB)
First.png (3KB)
WIND.jpeg (57KB)

The administrator has disabled public write access.

How do I include Wind in the right way? 2 years 2 weeks ago #42205

jurjendejong OFFLINE Fresh Boarder Posts: 28 Thank you received: 13	Hard to say without more configuration, but could it be that your model is shallow water (less than 1 m) and that the wind is ignored due to the default parameter THRESHOLD DEPTH FOR WIND at 1 m?
	The administrator has disabled public write access. The following user(s) said Thank You: Erken

How do I include Wind in the right way? 2 years 2 weeks ago #42208

Erken OFFLINE Fresh Boarder Posts: 27	Thank you, but yes its a very shallow area. Some parts are below 1m, but also some are up to 3 m deep. Is there a way to deactivate this parameter, so work around it that I can include wind?
	The administrator has disabled public write access.

How do I include Wind in the right way? 2 years 2 weeks ago #42209

jurjendejong OFFLINE Fresh Boarder Posts: 28 Thank you received: 13	You can reduce the value of the parameter in your .cas file. See the reference manual for more information.
	The administrator has disabled public write access. The following user(s) said Thank You: Erken