open TELEMAC-MASCARET The mathematically superior suite of solvers

I think the problem is here :

NVALUE_RFC = NVALUE_RFC + 1
IF(NVALUE_RFC.EQ.0) THEN
IF(LIGNE(IDEB:IFIN-1).NE.'T') THEN
IF(LNG.EQ.1) THEN
WRITE(LU,*) 'LA PREMIERE VARIABLE DOIT ETRE LE TEMPS T'
WRITE(LU,*) 'DANS LE FICHIER DES FRONTIERES LIQUIDES'
ENDIF
IF(LNG.EQ.2) THEN
WRITE(LU,*) 'FIRST VALUE MUST BE TIME_RFC, DENOTED T'
WRITE(LU,*) 'IN FILE OF LIQUID BOUNDARIES'
ENDIF
CALL PLANTE(1)
STOP

But I don't understand how to fix it.

Hello Claire,

It could be interesting that you upload your LIQUID BOUNDARIES FILE, or even the whole input files to try to run your case.

Chi-Tuan

Hello Chi-Tuan,

I found the problem. There were too many spaces between the time column and the solid discharges column so it didn't read the file well.

Thanks for taking the time to respond to me !

Claire

Hi,

I am using the telemac2d and sisyphe module, with a SOLID DISCHARGES input (based on time), but the simulation asks me for SOLID DISCHARGE PROFILE. I have entered the values according to the manual.

STAGE-DISCHARGE CURVE: 2

Q= 1335.6199999999999 Z= 124.86000000000000
Q= 1642.7000000000000 Z= 125.61499999999999
Q= 2129.7100000000000 Z= 126.56100000000001
Q= 2707.8299999999999 Z= 127.43600000000001
Q= 3556.2700000000000 Z= 128.42900000000000
Q= 3564.8400000000001 Z= 128.43799999999999
Q= 3951.3899999999999 Z= 128.81299999999999
Q= 3963.6999999999998 Z= 128.82400000000001
Q= 4258.7399999999998 Z= 129.08600000000001
Q= 4456.3100000000004 Z= 129.25100000000000
Q= 4459.1800000000003 Z= 129.25299999999999
Q= 5133.5699999999997 Z= 129.76599999999999

CORFON (TELEMAC2D): 1 BOTTOM SMOOTHINGS

TITLE OF PREVIOUS COMPUTATION: flume

NAME: VELOCITY U UNIT: M/S
NAME: VELOCITY V UNIT: M/S
NAME: WATER DEPTH UNIT: M
NAME: FREE SURFACE UNIT: M
NAME: BOTTOM UNIT: M
NAME: FROUDE NUMBER UNIT:
NAME: SCALAR FLOWRATE UNIT: M2/S
NAME: SCALAR VELOCITY UNIT: M/S
NAME: BOTTOM FRICTION UNIT:
NAME: COURANT NUMBER UNIT:
NAME: FRICTION VEL. UNIT: M/S

READ_DATASET : READ OF RECORD 11

TIME OF RECORD: 50000.00 S
ELAPSED TIME RESET TO ZERO
RESCUE : K AND EPSILON WILL BE SET AGAIN

================================================================================
ITERATION 0 TIME: 0.0000 S
PRERES: MAXIMUM COURANT NUMBER: 0.5597264
TELEMAC2D COUPLED WITH: SISYPHE
TELEMAC-2D: INTERNAL COUPLING WITH SISYPHE
PART 0 : INITIALISING SISYPHE
INBIEF (BIEF): NOT A VECTOR MACHINE (ACCORDING TO YOUR DATA)

THERE IS 1 ISLAND(S) IN THE DOMAIN

THERE IS 2 LIQUID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 434 , WITH GLOBAL NUMBER: 77831
AND COORDINATES: 372478.2 9352647.
ENDS AT BOUNDARY POINT: 459 , WITH GLOBAL NUMBER: 78954
AND COORDINATES: 372593.3 9352867.

BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 1980 , WITH GLOBAL NUMBER: 97337
AND COORDINATES: 375478.5 9362248.
ENDS AT BOUNDARY POINT: 2006 , WITH GLOBAL NUMBER: 97655
AND COORDINATES: 375640.2 9362452.

THERE IS 3 SOLID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 2006 , WITH GLOBAL NUMBER: 97655
AND COORDINATES: 375640.2 9362452.
ENDS AT BOUNDARY POINT: 434 , WITH GLOBAL NUMBER: 77831
AND COORDINATES: 372478.2 9352647.

BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 459 , WITH GLOBAL NUMBER: 78954
AND COORDINATES: 372593.3 9352867.
ENDS AT BOUNDARY POINT: 1980 , WITH GLOBAL NUMBER: 97337
AND COORDINATES: 375478.5 9362248.

BOUNDARY 3 :
BEGINS AT BOUNDARY POINT: 3293 , WITH GLOBAL NUMBER: 17238
AND COORDINATES: 369013.6 9355178.
ENDS AT BOUNDARY POINT: 3293 , WITH GLOBAL NUMBER: 17238
AND COORDINATES: 369013.6 9355178.
STRCHE (BIEF): NO MODIFICATION OF FRICTION

INITIALISATION EN CAS DE COUPLAGE : PART= 0
QSCL REINITIALISED IN INIT_TRANSPORT
FOR CLASS 1
QS REINITIALISED IN INIT_TRANSPORT

================================================================================
ITERATION 0 TIME: 0.0000 S

SISYPHE COUPLED WITH: TELEMAC2D
TELEMAC2D INITIALIZED
THE LIQUID BOUNDARIES FILE CONTAINS
6 LINES WITH:
Q(1)
USING STREAMLINE VERSION 7.3 FOR CHARACTERISTICS
THE LIQUID BOUNDARIES FILE CONTAINS
6 LINES WITH:
QG(1)
DISIMP : PROBLEM ON BOUNDARY NUMBER 1
GIVE A SOLID DISCHARGE PROFILE
IN THE BOUNDARY CONDITIONS FILE

PLANTE: PROGRAM STOPPED AFTER AN ERROR
RETURNING EXIT CODE: 2
STOP 1
_____________
runcode::main:
:
|runCode: Fail to run
|C:\opentelemac-mascaret\v8p0\maestria\00_II\t2d_sis.cas_2021-01-18-18h11min37s\out_telemac2d.exe
|~~~~~~~~~~~~~~~~~~
|STOP 1
|~~~~~~~~~~~~~~~~~~

And the LIQUID BOUNDARIES FILE>

T QG(1)
s m3/s
0 0.00091
864000 0.00098
3456000 0.00082
6134400 0.00062
8726400 0.00038
11404800 0.00049
14083200 0.00031

Could you give me some recomendations?

thanks