Hello,
In my TOMAWAC model, I’m using precomputed current and water level from TELEMAC as input, along with imposed wind. I set the water depth using both WATER DEPTH and WD, but neither is being recognized in the simulation.
Details:
The water depth file is in Serafin format and has been verified.
Relevant keywords for water depth input are configured in the cas file.
Any advice on why [name removed] isn’t recognizing the water depth input would be appreciated!Attached please see the files and below is my TOMAWAC cas file.
/--------------------------------------------------------------------
/ FICHIER DES PARAMETRES DE TOMAWAC
/--------------------------------------------------------------------
/ FICHIERS
/--------------------------------------------------------------------
GEOMETRY FILE = ‘Geo3.slf’
BOUNDARY CONDITIONS FILE = ‘CLI_tom.cli’
/
2D RESULTS FILE = ‘r2d_fetch_lim_fd4.slf’
BINARY CURRENTS FILE = ‘current.slf’
CURRENTS FILE FORMAT = 3
TIDAL WATER LEVEL FILE FORMAT = 3
BINARY TIDAL WATER LEVEL FILE = ‘WATERDEPTH.slf’
RANK OF THE WATER LEVEL DATA IN THE TELEMAC FILE = 1
/--------------------------------------------------------------------
/ DIVERS ENTREES-SORTIES
/--------------------------------------------------------------------
TITLE = ‘FETCH LIMITED TEST-CASE CONSTANT WIND 20 M/S FINITE DEPTH’
PERIOD FOR GRAPHIC PRINTOUTS = 100
VARIABLES FOR 2D GRAPHIC PRINTOUTS = 'HM0,DMOY,TPR5,ZF,WD,FX,FY,
UX,UY,VX,VY’
PERIOD FOR LISTING PRINTOUTS = 100
/ABSCISSAE OF SPECTRUM PRINTOUT POINTS = 252135.5; 489173.875 ;
/1000000.0
/ORDINATES OF SPECTRUM PRINTOUT POINTS = 254698.640625; 258180.75 ;
/274977.5
/--------------------------------------------------------------------
/ DISCRETISATION
/--------------------------------------------------------------------
TIME STEP = 10
NUMBER OF TIME STEP = 360
/NUMBER OF ITERATIONS FOR THE SOURCE TERMS = 1
NUMBER OF DIRECTIONS = 12
MINIMAL FREQUENCY = 0.05
FREQUENTIAL RATIO = 1.1
NUMBER OF FREQUENCIES = 30
/--------------------------------------------------------------------
/ OPTIONS DU CALCUL
/--------------------------------------------------------------------
SPECTRUM TAIL FACTOR = 5.
SPHERICAL COORDINATES = NO
CONSIDERATION OF A STATIONARY CURRENT = NO
CONSIDERATION OF A WIND = YES
STATIONARY WIND = YES
CONSIDERATION OF PROPAGATION = YES
CONSIDERATION OF SOURCE TERMS = YES
WAVE GROWTH LIMITER = 2
/INITIAL STILL WATER LEVEL = 30.
/--------------------------------------------------------------------
/ SPECTRE INITIAL
/--------------------------------------------------------------------
TYPE OF INITIAL DIRECTIONAL SPECTRUM = 1
INITIAL DIRECTIONAL SPREAD 1 = 1.
/--------------------------------------------------------------------
/ CONDITIONS AUX LIMITES
/--------------------------------------------------------------------
TYPE OF BOUNDARY DIRECTIONAL SPECTRUM = 6
BOUNDARY SIGNIFICANT WAVE HEIGHT = 0.
/--------------------------------------------------------------------
/ TERMES SOURCES
/--------------------------------------------------------------------
INFINITE DEPTH = NO
WIND GENERATION = 2
WIND VELOCITY ALONG X = -4.82
WIND VELOCITY ALONG Y = -5.75
WHITE CAPPING DISSIPATION = 2
BOTTOM FRICTION DISSIPATION = 1
NON-LINEAR TRANSFERS BETWEEN FREQUENCIES = 1
LINEAR WAVE GROWTH = 1