KEYWORD IN FRENCH

System Modules WAQTEL / AED2
1

Hello [name removed]

I am doing test case in TELEMAC 3D for water quality process, and until now my case file is written in [group removed], and it is one keyword that is not working:

runCAS:

|readCAS: … could not find the following keyword in the selected dictionary file: PROCESSUS DE QUALITE DEAU

| ~> you may not be running the code associated to your CAS file.

I tried:

PROCESSUS DE QUALITE DEAU

PROCESSUS DE QUALITE D’'EAU

PROCESSUS DE QUALITE D’EAU

My cases files are in the attachment.

Thx a lot

cas_rejet_exchange.cas (6.16 KB)
waq_steer_2020.cas (3.82 KB)

2

Hi,

What version of telemac are you using ?

3

Hello

telemac_v7p2r3

4

If you want to use water quality it is strongly recommended to use the latest version v8p1.

As for your steering file the proper way should be:

PROCESSUS DE QUALITE D’EAU

with a single quote.

I managed to have the one attached working (had to remove TEMPERATURE DE L’AIR as the keyword does not seem to exists in v7p2r3)

Hope it helps.

cas_rejet_exchange.cas (5.95 KB)

5

Thank you very much is working :):):slight_smile:

6

Also, I want to ask if I want to run exchange water air and eutro process, how I supposed to modify my case file?

something like this?

and my water quality steering file activated some keyword associated with eutrophication process?

/************************************

/ WATER QUALITY

/************************************

COUPLAGE AVEC : ‘WAQTEL’

FICHIER DES PARAMETRES DE WAQTEL : ‘waq_steer_2020.cas’

PROCESSUS DE QUALITE D’EAU : 3,5

??

Thank you very much

7

Hello,

As my colleague [name removed], it is strongly recommended to use the latest version v8p1, in particular if using WAQTEL for many reasons:

  • there is a nearly full documentation since this version (technical manual with the equations and processes solved, updated user manual + reference manuals with a better description of the keywords to be used + light description of examples in the validation document),

  • a few bugs have been fixed since this version only,

  • some improvements have appeared since a few versions.

Anyway, as told in the WAQTEL user manual, to use both EUTRO and THERMIC modules, you have to give 55 to the keyword WATER QUALITY PROCESS (or PROCESSUS DE QUALITE D’EAU), 55 = 5 times 11 in v8.0 or 8.1. Be careful, the number of process has changed since version 8.0 to enable to use several processes together. You may notice that with older versions than 8.0 (e.g. 7.2), what you want to do in your post in http://www.opentelemac.org/index.php/kunena/21-telemac-3d/12682-keyword-in-french/reply#35578 is not possible…

Hope this helps,

[name removed]

8

Yes, I tried but my condim file is not working anymore, so, when I can find condim v8?

9

I have this: TELEMAC3D [name removed]21/08/2010

10

I already find it in my sources files.

Thank you very much for the support

11

my model is not running anymore :frowning:

| TREATING SUB-DOMAIN 3

|

| NO 2D ELEMENTS IN A 2D MESH