TELEMAC-3D + TOMAWAC

System Modules TOMAWAC
1

Hello [name removed],

I need to run Tomawac and Telemac3d together (in parallel).

How can I do it?

[name removed]

2

Hello,

You can first read the user documentations and have a look at the following example:

v7p3r1/examples/tomawac/3Dcoupling

[name removed]

1 Like
3

hi,

in this example which is the command that i have to use??

telemac3d.py --ncsize=4 T3D_littoral.cas

or

tomawac.py --ncsize=4 tom_littoral.cas ??

the first give me an error like this…

https://scontent-mxp1-1.xx.fbcdn.net/v/t1.15752-9/40685489_231979724140181_3658538075711078400_n.jpg?_nc_cat=0&oh=a300f909a4c3ffc92fc566dfac407aa5&oe=5BF930D3

the second do something but i don’t know if is a good result.

thank a lot

[name removed]

4

Hi

The second command run Tomawac only

The first command run Telemac3d coupled with Tomawac which is probably what you want to do.

The error comes from a problem in tomawac more specifically in the punctual results parts. You probably didn’t choose to write such result but as there is non name by default this create a conflict in the parallel writing.

As a potential solution you could give a name to the keyword PUNCTUAL RESULT FILE (check the exact spelling) and this will probably solve your problem (I hope!)

Regards

1 Like
5

Hi,

i worked a lot for the coupling between telemac and tomawac. I can’t found a solution for the run becouse it need a lot of time.

For run 3 hours I need something like 2 hours and half of real time.

And i can’t work with high time steps and high period of coupling.

[name removed]