TELEMAC-MASCARET Forum: Problem with Inlet (1/1)

Problem with Inlet 8 years 11 months ago #19098

EGleirscher
OFFLINE
Junior Boarder
Posts: 35

Dear community,

I was running a Telemac 2d simulation with 1 inlet and one outlet which was fine. After adding a new inlet I just receive the following error message:

Mise a jour du fichier '/data/DATA/telemac/v7p0r1/v7p0r1/configs/cfgmak.mak' terminee.


=========================================================
 Telemac System 5.6 to 6.2 - Perl scripts version 6.2    
=========================================================
starting...

HOSTTYPE         : gfortran_linux-debug 
PROJECT          : /data/DATA/telemac/v7p0r1/v7p0r1 
BASE DIRECTORY   : /media/SimData/simulation/50379/Sim_IST_Mellach 
LAUNCH DIRECTORY : /media/SimData/simulation/50379/Sim_IST_Mellach 
WORK DIRECTORY   : /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp 
PARAMETER FILE   : HQBasis.cas 


*** Using CUSTOM configuration file : 
    /data/DATA/telemac/v7p0r1/v7p0r1/configs/systel.ini ***


/data/DATA/telemac/v7p0r1/v7p0r1/sources/telemac2d/telemac2d.dico
*** Using CUSTOM MPI configuration file : 
    /media/SimData/simulation/50379/Sim_IST_Mellach/mpi_telemac.conf ***


*** TELEMAC2D ON STATION ***


*** Interactive mode ***


*** RELEASE v7p0 ***

________________________________________________________
Steering file   :      HQBasis.cas
________________________________________________________

________________________________________________________
Starting execution: telemac2d.bat     
________________________________________________________
______________________________________________________________________________
*** DEFAULT PARALLEL EXECUTABLE ***
 
   /data/DATA/telemac/v7p0r1/v7p0r1/builds/gfortran_linux-debug/bin/telemac2dv7p0.exe
______________________________________________________________________________
*** ALLOCATION OF USER FILES *** 

 - STEERING FILE                                    : HQBasis.cas            
 - DICTIONARY                                       : telemac2d.dico         
 - GEOMETRY FILE                                    : Wasserstand2m.slf            
STOP 0
    (split for 4 processors)  
 - BOUNDARY CONDITIONS FILE                         : Conlim.cli                       
    (split for 4 processors)  
 - LIQUID BOUNDARIES FILE                           : Smooth_Inflow.txt                     

COPY Smooth_Inflow.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DIMP00003-00000
COPY Smooth_Inflow.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DIMP00003-00001
COPY Smooth_Inflow.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DIMP00003-00002
COPY Smooth_Inflow.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DIMP00003-00003
 - STAGE-DISCHARGE CURVES FILE                      : Pegelschluessel.txt                          

COPY Pegelschluessel.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DMAB00003-00000
COPY Pegelschluessel.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DMAB00003-00001
COPY Pegelschluessel.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DMAB00003-00002
COPY Pegelschluessel.txt  /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/T2DMAB00003-00003
 - SECTIONS INPUT FILE                              : CSections.txt                  
______________________________________________________________________________
*** MPI MACHINE *** 
 MPI machine ok (with 4 processors).  
______________________________________________________________________________
*** RUNNING *** 

 MPI launcher  : /usr/local/bin/mpirun -machinefile mpirun.txt -np 4 out5966_gfortran_linux-debug.exe 
 MASTER PROCESSOR NUMBER            0  OF THE GROUP OF            4
 EXECUTABLE FILE: /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/A.EXE
 BARRIER PASSED





 LISTING OF TELEMAC-2D ------------------------------------------------------------------------------





                 TTTTT  EEEEE  L      EEEEE  M   M  AAAAA  CCCCC
                   T    E      L      E      MM MM  A   A  C    
                   T    EEE    L      EEE    M M M  AAAAA  C    
                   T    E      L      E      M   M  A   A  C    
                   T    EEEEE  LLLLL  EEEEE  M   M  A   A  CCCCC
                                                                
                         2D    VERSION 7.0    FORTRAN 90        
                               WITH SEVERAL TRACERS             
                         COUPLED WITH SISYPHE AND TOMAWAC       






  

                   ********************************************
                   *               LECDON:                    *
                   *        AFTER CALLING DAMOCLES            *
                   *        CHECKING OF DATA  READ            *
                   *         IN THE STEERING FILE             *
                   ********************************************


 EXITING LECDON. NAME OF THE STUDY:
                                                                         

 OPENING FILES FOR TELEMAC2D               



                          *****************************
                          *    MEMORY ORGANIZATION    *
                          *****************************



 READGEO1: TITLE= newSelafin                                                              
            NUMBER OF ELEMENTS:    32939
            NUMBER OF POINTS:    16597

            FORMAT NOT INDICATED IN TITLE
  
 MXPTEL (BIEF) : MAXIMUM NUMBER OF ELEMENTS AROUND A POINT:  13
                 MAXIMUM NUMBER OF POINTS AROUND A POINT:  14
 (GLOBAL MESH)
 SEGBOR (BIEF) : NUMBER OF BOUNDARY SEGMENTS =    253
 INCLUDING THOSE DUE TO DOMAIN DECOMPOSITION
 CORRXY (BIEF):NO MODIFICATION OF COORDINATES

 MESH: MESH   ALLOCATED
 POINT_TELEMAC2D: SECTIONS DEFINED IN THE SECTIONS INPUT FILE



                     *************************************
                     *    END OF MEMORY ORGANIZATION:    *
                     *************************************

 INBIEF (BIEF): NOT A VECTOR MACHINE (ACCORDING TO YOUR DATA)
 FONSTR : FRICTION COEFFICIENTS READ IN THE
          GEOMETRY FILE
 STRCHE (BIEF): NO MODIFICATION OF FRICTION

  
 NUMBER OF LIQUID BOUNDARIES:           3
  
 STAGE-DISCHARGE CURVE:           1
  
 Q=   30.000000000000000       Z=   584.00000000000000     
 Q=   180.00000000000000       Z=   585.00000000000000     
 Q=   420.00000000000000       Z=   586.00000000000000     
 Q=   750.00000000000000       Z=   587.00000000000000     
 Q=   1200.0000000000000       Z=   588.00000000000000     
 Q=   1600.0000000000000       Z=   589.00000000000000     
  
  
  

 CORFON (TELEMAC2D): NO MODIFICATION OF BOTTOM


================================================================================
 ITERATION        0    TIME:   0.0000 S
STOP 2

Backtrace for this error:
  + function plante_ (0x9980EF)
    at line 81 of file plante.f
  + function sl_ (0x51F251)
    at line 113 of file sl.f
  + function bord_ (0x44674F)
    at line 204 of file bord.f
  + function telemac2d_ (0x53C2B6)
    at line 1759 of file telemac2d.f
  + function homere_telemac2d (0x432307)
    at line 196 of file homere_telemac2d.f
  + /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f1080f9f76d]

===================================================================================
=   BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
=   EXIT CODE: 2
=   CLEANING UP REMAINING PROCESSES
=   YOU CAN IGNORE THE BELOW CLEANUP MESSAGES
===================================================================================
## Erreur : Fin anormale : cd /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp; /usr/local/bin/mpirun -machinefile mpirun.txt -np 4 out5966_gfortran_linux-debug.exe :512
## Error : System command failed for /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp/telemac2d.bat :512
________________________________________________________
Execution finished: telemac2d.bat     
________________________________________________________
No compilation/linking/file errors detected.
Execution errors detected.
Please see messages in stdout above or study stderr output.

Working directory: /media/SimData/simulation/50379/Sim_IST_Mellach/HQBasis.cas5966_tmp
can be manually deleted with: /media/SimData/simulation/50379/Sim_IST_Mellach/delete_HQBasis.cas5966

Returning exit status 1 

=========================================================
 Telemac System 5.6 to 6.2 - Perl scripts version 6.2    
=========================================================
...stopping.

I don't know if it is about my mesh or if it is something else. I hope someone can help me in solving this problem.

I attached my example

Thank you in advance
Engelbert

File Attachment:

File Name: Sim.zip
File Size: 921 KB

The administrator has disabled public write access.

Problem with Inlet 8 years 11 months ago #19099

jmhervouet	Hello, Your new inlet has probably changed the numbering of your liquid boundaries, which changes the data in your stage-discharge curves and the keywords PRESCRIBED FLOWRATES, PRESCRIBED ELEVATIONS. With best regards, Jean-Michel Hervouet
	The administrator has disabled public write access.

Problem with Inlet 8 years 11 months ago #19114

EGleirscher
OFFLINE
Junior Boarder
Posts: 35

Dear Jean-Michel Hervouet,

I systematically tried to locate where the error comes from. So this were my steps:

- I started from my running system where I want to add a new inlet
- I created a hole in the mesh using the "delete elements in polygon tool" in blue kenue
- Further I tried to run a simulation with this new mesh but without a further boundary condition (still just 1 inlet and 1 outlet)
- running in scalar mode I get the following output:

POINT 51425 IS ON A BOUNDARY
BUT NOT IN THE LIST OF BOUNDARY POINTS
OR THE NUMBER OF LINES IN THE BOUNDARY
CONDITIONS FILE IS GREATER THAN: 855
NUMBER TAKEN IN THE GEOMETRY FILE

Looking in my boundary conditions file point 51425 is in the list (last point) but it is true that the number of lines in the file is more than 855.

I checked wether the conlim file is based on the same mesh as the geometry file, and they are equal. I'm wondering where telemac gets the information of the conlim file length? Do I have to do something like a renumbering after changing my mesh in blue kenue?

Thank you
Engelbert Gleirscher

note that the files in the first post are not actual anymore

The administrator has disabled public write access.

Problem with Inlet 8 years 11 months ago #19116

jmhervouet

Hello,

This must be a problem in your use of Blue Kenue. The geometry file contains an array that says if a point is on a boundary, hence we can count them, then this number must be the number of lines in the boundary conditions file. In your case the point 51425 does not appear in the boundary conditions file. This global number is the last but one column in the file, so you can check if the sequence 51425 is in the file.

With best regards,

Jean-Michel Hervouet

The administrator has disabled public write access.

Problem with Inlet 8 years 11 months ago #19118

c.coulet OFFLINE Moderator Posts: 3722 Thank you received: 1031	Hi In fact, if you open a selafin file in blue kenue, delete some elements and save the file, there is no update of the ipobo array. Blue Kenue create this array only when you drag and drop a mesh file in a new selafin file. Hope this helps to clarify the reason of this error Regards
	Christophe The administrator has disabled public write access. The following user(s) said Thank You: EGleirscher, PauSol

Problem with Inlet 8 years 11 months ago #19133

Serrer OFFLINE Moderator Posts: 720 Thank you received: 304	Akkkk!!! I was told that the IPOBO array is not used so Blue Kenue doesn't update it after a mesh edit. Also, you must create a new boundary conditions file after ANY edit to the mesh. So bottom line is: 1. create a new Selafin object each time you edit the mesh 2. then create a new boundary conditions object. Cheers... Martin
	The administrator has disabled public write access. The following user(s) said Thank You: EGleirscher, PauSol

Problem with Inlet 8 years 11 months ago #19136

EGleirscher OFFLINE Junior Boarder Posts: 35	Dear all, thank you helping to solve my problem. After setting up a new mesh without using the option "copy node values from source", and with creating a new conlim file from this mesh everything is fine. Thank you all again Engelbert
	The administrator has disabled public write access.

open TELEMAC-MASCARET The mathematically superior suite of solvers

Nav view search

Navigation

Search

TOPIC: Problem with Inlet

Problem with Inlet 8 years 11 months ago #19098

File Attachment:

Problem with Inlet 8 years 11 months ago #19099

Problem with Inlet 8 years 11 months ago #19114

Problem with Inlet 8 years 11 months ago #19116

Problem with Inlet 8 years 11 months ago #19118

Problem with Inlet 8 years 11 months ago #19133

Problem with Inlet 8 years 11 months ago #19136

The open TELEMAC-MASCARET template for Joomla!2.5, the HTML 4 version.

Latest News

Latest forum posts