open TELEMAC-MASCARET The mathematically superior suite of solvers

Hi,

I got this error why running a coupling 3D model with Tomawac (before each Tomawac and 3D model runs separately without error). Do you know why?

Thanks a lot!


Regards
Huy

---

runcode::main:
:
|runCode: Fail to run
|/media/huyquangtran/PHD_DATA/3D_NEW_DATA/T3D_MODEL_VERSION3.cas_2017-02-14-13h30min13s/out_IP_tide_wind
|~~~~~~~~~~~~~~~~~~
|At line 280 of file /home/huyquangtran/telemac/v7p2/sources/tomawac/ecrspe.f (unit = 17, file = 'WACVEB')
|Fortran runtime error: Cannot write to file opened for READ

hello Huy

We have recently found some error on coupling with 2D or 3D, but the message was not like yours. Could you post the case so that i can check where it comes from ?

Regards

Thierry

Thanks Thierry for your help in advance.

I just guess it comes from fortran in sources

Do you mean only CAS file? or all files to run the model?

As my project is for publications. I can't post all data here at the moment. If you need all, I will upload to a link and inbox you.

Thanks & Best Regards
Huy

Hello Huy

Do you have your own ecrspe.f ? it doesn't seem so ...

Yes i wanted to run the model to see where it comes from, so a link will be perfect.

regards

Thierry

Dear Thierry,

I don't have that file for my self. I will upload my project, and inbox you.

Thanks & Best Regards

Huy

Hello

It was a bug linked to the file number and a lack of filter in the subroutine ecrspe.f

Here is the new one, it worked on your case.

regards

Thierry

Dear Thierry,

Thanks for your help, but I get new error after updating ecrspe.f file.

Could you help me more?

Best Regards
Huy

================================================================================
TEMPS : 0.0000 SECONDES 0IEME ITERATION

---

LIMWAC: FIRST PASS
LIMWAC: TITLE OF FORMATTED WAVES FILE: NO_TIME_POINTS
LIMWAC: NEW COMPUTATION
LIMWAC: INTERPOLATION PASS
AT1= 0.0s, Hm1= 1.14m, DirN1= 14.3deg, Fpi1= 0.090Hz
AT2= 1800.0s, Hm2= 1.11m, DirN2= 17.3deg, Fpi2= 0.090Hz
BOUNDARY WAVE CONDIT: HM0= 1.14m, DIRN= 14.3deg, FPI= 0.090Hz

---

Primary job terminated normally, but 1 process returned
a non-zero exit code.. Per user-direction, the job has been aborted.

---

---

mpiexec detected that one or more processes exited with non-zero status, thus causing
the job to be terminated. The first process to do so was:

Process name: [[44462,1],0]
Exit code: 2

---

_____________
runcode::main:
:
|runCode: Fail to run
|mpiexec -wdir /home/huyquangtran/telemac/v7p2/3D_NEW_DATA/T3D_COUPLING_NEW.cas_2017-02-15-05h37min32s -n 8 /home/huyquangtran/telemac/v7p2/3D_NEW_DATA/T3D_COUPLING_NEW.cas_2017-02-15-05h37min32s/out_IP_tide_wind
|~~~~~~~~~~~~~~~~~~
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx5': /lib64/libmlx5-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|libibverbs: Warning: couldn't load driver 'mlx4': /lib64/libmlx4-rdmav2.so: symbol ibv_exp_cmd_destroy_flow, version IBVERBS_1.1 not defined in file libibverbs.so.1 with link time reference
|[spartan-bm008.hpc.unimelb.edu.au:105830] 7 more processes have sent help message help-mpi-btl-base.txt / btl:no-nics
|[spartan-bm008.hpc.unimelb.edu.au:105830] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
|At line 280 of file /home/huyquangtran/telemac/v7p2/sources/tomawac/ecrspe.f (unit = 17, file = '/home/huyquangtran/telemac/v7p2/3D_NEW_DATA/T3D_COUPLING_NEW.cas_2017-02-15-05h37min32s/WACVEB00007-00000')
|Fortran runtime error: Cannot write to file opened for READ
|~~~~~~~~~~~~~~~~~~

Sorry! I thought it is required to recompile the whole version. After doing this, It works now.

I will let you know if there are further errors.

Good night France