open TELEMAC-MASCARET The mathematically superior suite of solvers

Hello,

In my TOMAWAC model, I'm using precomputed current and water level from TELEMAC as input, along with imposed wind. I set the water depth using both WATER DEPTH and WD, but neither is being recognized in the simulation.

Details:
The water depth file is in Serafin format and has been verified.
Relevant keywords for water depth input are configured in the cas file.
Any advice on why TOMAWAC isn't recognizing the water depth input would be appreciated!Attached please see the files and below is my TOMAWAC cas file.

/

---

/ FICHIER DES PARAMETRES DE TOMAWAC
/

---

/ FICHIERS
/

---

GEOMETRY FILE = 'Geo3.slf'
BOUNDARY CONDITIONS FILE = 'CLI_tom.cli'
/
2D RESULTS FILE = 'r2d_fetch_lim_fd4.slf'
BINARY CURRENTS FILE = 'current.slf'
CURRENTS FILE FORMAT = 3
TIDAL WATER LEVEL FILE FORMAT = 3
BINARY TIDAL WATER LEVEL FILE = 'WATERDEPTH.slf'
RANK OF THE WATER LEVEL DATA IN THE TELEMAC FILE = 1
/

---

/ DIVERS ENTREES-SORTIES
/

---

TITLE = 'FETCH LIMITED TEST-CASE CONSTANT WIND 20 M/S FINITE DEPTH'
PERIOD FOR GRAPHIC PRINTOUTS = 100
VARIABLES FOR 2D GRAPHIC PRINTOUTS = 'HM0,DMOY,TPR5,ZF,WD,FX,FY,
UX,UY,VX,VY'
PERIOD FOR LISTING PRINTOUTS = 100
/ABSCISSAE OF SPECTRUM PRINTOUT POINTS = 252135.5; 489173.875 ;
/1000000.0
/ORDINATES OF SPECTRUM PRINTOUT POINTS = 254698.640625; 258180.75 ;
/274977.5
/

---

/ DISCRETISATION
/

---

TIME STEP = 10
NUMBER OF TIME STEP = 360
/NUMBER OF ITERATIONS FOR THE SOURCE TERMS = 1
NUMBER OF DIRECTIONS = 12
MINIMAL FREQUENCY = 0.05
FREQUENTIAL RATIO = 1.1
NUMBER OF FREQUENCIES = 30
/

---

/ OPTIONS DU CALCUL
/

---

SPECTRUM TAIL FACTOR = 5.
SPHERICAL COORDINATES = NO
CONSIDERATION OF A STATIONARY CURRENT = NO
CONSIDERATION OF A WIND = YES
STATIONARY WIND = YES
CONSIDERATION OF PROPAGATION = YES
CONSIDERATION OF SOURCE TERMS = YES
WAVE GROWTH LIMITER = 2
/INITIAL STILL WATER LEVEL = 30.
/

---

/ SPECTRE INITIAL
/

---

TYPE OF INITIAL DIRECTIONAL SPECTRUM = 1
INITIAL DIRECTIONAL SPREAD 1 = 1.
/

---

/ CONDITIONS AUX LIMITES
/

---

TYPE OF BOUNDARY DIRECTIONAL SPECTRUM = 6
BOUNDARY SIGNIFICANT WAVE HEIGHT = 0.
/

---

/ TERMES SOURCES
/

---

INFINITE DEPTH = NO
WIND GENERATION = 2
WIND VELOCITY ALONG X = -4.82
WIND VELOCITY ALONG Y = -5.75
WHITE CAPPING DISSIPATION = 2
BOTTOM FRICTION DISSIPATION = 1
NON-LINEAR TRANSFERS BETWEEN FREQUENCIES = 1
LINEAR WAVE GROWTH = 1

Hello,

I do not see any problem by just reading your cas file. Could you please post your full case so that i can try to run your simulation and see where the problem is ?

regards

Thanks for looking at this. It is a big help for me. I think I am not able to attach the files here because of the size limitation. Is there another way to send the files to you? Thanks


Thanks again or your help!
Sanaz