open TELEMAC-MASCARET The mathematically superior suite of solvers

Hello,

where in the downloadsection can i find the automatic installer for telemac-mascaret v7p2?

Best regards

Michael

Found it

Dear all,
I have a problem with automatic install.
My os is window 8.1 64bit. I am used to telemac before.
After I would like to get more disk space in drive C, I copy opentelemac-mascaret to USB driver and Then I delete all folder in C driver.
Now I try to install telemac with automatic option. When I compile: compileTELEMAC.py this have error below.
Although I try many ways it still does't work.
Any one please help me.
Thank in advantage,

Hi
No error message in your post...
If you move the directory to a USB driver, the letter should be different (not C:) so you have to change it in the config file...

Regards

Dear Mr C.Coulet,
I attached the word file a bout error but it disappear. I am sorry about that.
Error appear in my command like that:
Compiling the program HOMERE_MASCARET and dependents
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

C:\opentelemac-mascaret\v7p2\sources\mascaret\API\f90\import_xml.f90:76.35:---s

startElement_handler=START_ELEMENT_HANDLER, endElement_handler=EN
1
Error: Internal procedure 'start_element_handler' is not allowed as an actual ar
gument at (1)
C:\opentelemac-mascaret\v7p2\sources\mascaret\API\f90\import_xml.f90:76.77:

startElement_handler=START_ELEMENT_HANDLER, endElement_handler=END_
1
Error: Internal procedure 'end_element_handler' is not allowed as an actual argu
ment at (1)
C:\opentelemac-mascaret\v7p2\sources\mascaret\API\f90\import_xml.f90:77.33:

characters_handler=CHARACTERS_HANDLER)
1
Error: Internal procedure 'characters_handler' is not allowed as an actual argum
ent at (1)


Hummm ... I could not complete my work.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

compileTELEMAC::createObjFiles:
+> failed: gfortran -c -O3 -fopenmp -fconvert=big-endian -frecord-marker=4
-I C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\mascaret C:\opentelemac
-mascaret\v7p2\sources\mascaret\API\f90\import_xml.f90
... The following command failed for the reason above (or below)
gfortran -c -O3 -fopenmp -fconvert=big-endian -frecord-marker=4 -I C:\opentelem
ac-mascaret\v7p2\builds\win7gfors\lib\mascaret C:\opentelemac-mascaret\v7p2\so
urces\mascaret\API\f90\import_xml.f90:

C:\opentelemac-mascaret\v7p2>
I am very appreciate that you quickly comment on my issue.
Best regards,

Hi
Word file is not allowed for an attached file. Use a .txt file insteat and it should works.
About the error, I don't have any idea and should investigate more in detail. Last time I compiled on my computer I didn't have any problem.
Nevertheless, If you're not interested in using Mascaret, you could amit it by specifying "system -mascaret" in the systel.cfg

regards

Dear Mr C.Coulet,
Following your guide, when I type compileTELEMAC.py in command it finised without error. But when I try to run example , error like below:

C:\opentelemac-mascaret\v7p2>runcode.py telemac2d C:\opentelemac-mascaret\v7p2\e
xamples\telemac2d\malpasset\t2d_malpasset-small_charac.cas


Loading Options and Configurations
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

_____ ___ ____
|___ | |__ \ |___ \
__ __ _/ / _ __ ) | _ __ __) |
\ \ / / |_ _| | '_ \ / / | '__| |__ <
\ V / / / | |_) | / /_ | | ___) |
\_/ /_/ | .__/ |____||_| |____/
| |
|_|
_ _ __ ___ ____ __ _____
_| || |_ /_ | / _ \ |___ \ / / | ____|
_ __ ___ __ __ |_ __ _| | || | | | __) | / /_ | |__
| '__| / _ \\ \ / / _| || |_ | || | | | |__ < | '_ \ |___ \
| | | __/ \ V / _ |_ __ _| | || |_| | ___) || (_) | ___) |
|_| \___| \_/ (_) |_||_| |_| \___/ |____/ \___/ |____/


... parsing configuration file: C:\opentelemac-mascaret\v7p2\configs\systel_trun
k.cfg


Running your CAS file for:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

+> configuration: win7gfors
+> root: C:\opentelemac-mascaret\v7p2


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


... reading the main module dictionary

... processing the main CAS file(s)
+> running in English

... handling temporary directories

... checking coupling between codes

... checking parallelisation

... first pass at copying all input files
copying: geo_malpasset-small.slf C:\opentelemac-mascaret\v7p2\examples\t
elemac2d\malpasset\t2d_malpasset-small_charac.cas_2017-09-08-23h53min35s\T2DGEO
copying: t2d_malpasset.f C:\opentelemac-mascaret\v7p2\examples\telemac2d
\malpasset\t2d_malpasset-small_charac.cas_2017-09-08-23h53min35s\t2dfort.f
copying: geo_malpasset-small.cli C:\opentelemac-mascaret\v7p2\examples\t
elemac2d\malpasset\t2d_malpasset-small_charac.cas_2017-09-08-23h53min35s\T2DCLI
re-copying: C:\opentelemac-mascaret\v7p2\examples\telemac2d\malpasset\t2d_m
alpasset-small_charac.cas_2017-09-08-23h53min35s\T2DCAS
copying: telemac2d.dico C:\opentelemac-mascaret\v7p2\examples\telemac2d\
malpasset\t2d_malpasset-small_charac.cas_2017-09-08-23h53min35s\T2DDICO

... checking the executable
Driving: gfortran -fopenmp -fconvert=big-endian -frecord-marker=4 -v -lm -o t2d_
malpasset.exe t2dfort.o C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\telema
c2d\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\waqte
l\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\tomawac
\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\sisyphe\
homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\stbtel\ho
mere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\ad\ho
mere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\nestor\home
re_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\bief\ho
mere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\herme
s\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\p
arallel\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\u
tils\damocles\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors
\lib\utils\special\homere_telemac2d.lib -lgfortranbegin -lgfortran
Using built-in specs.
Target: i586-pc-mingw32
Configured with: ../gcc-trunk/configure --prefix=/mingw --enable-languages=c,for
tran --with-gmp=/home/FX/gfortran/dependencies --disable-werror --enable-threads
--disable-nls --build=i586-pc-mingw32 --enable-libgomp --disable-shared --disab
le-win32-registry --with-dwarf2 --disable-sjlj-exceptions
Thread model: win32
gcc version 4.5.0 20090421 (experimental) [trunk revision 146519] (GCC)
COMPILER_PATH=c:/program files (x86)/gfortran/bin/../libexec/gcc/i586-pc-mingw32
/4.5.0/;c:/program files (x86)/gfortran/bin/../libexec/gcc/
LIBRARY_PATH=c:/program files (x86)/gfortran/bin/../lib/gcc/i586-pc-mingw32/4.5.
0/;c:/program files (x86)/gfortran/bin/../lib/gcc/;c:/program files (x86)/gfortr
an/bin/../lib/gcc/i586-pc-mingw32/4.5.0/../../../
Reading specs from c:/program files (x86)/gfortran/bin/../lib/gcc/i586-pc-mingw3
2/4.5.0/../../../libgomp.spec
COLLECT_GCC_OPTIONS='-fopenmp' '-fconvert=big-endian' '-frecord-marker=4' '-v' '
-o' 't2d_malpasset.exe' '-mtune=pentium' '-mthreads'
c:/program files (x86)/gfortran/bin/../libexec/gcc/i586-pc-mingw32/4.5.0/collec
t2.exe -Bdynamic -o t2d_malpasset.exe c:/program files (x86)/gfortran/bin/../lib
/gcc/i586-pc-mingw32/4.5.0/../../../crt2.o c:/program files (x86)/gfortran/bin/.
./lib/gcc/i586-pc-mingw32/4.5.0/crtbegin.o -Lc:/program files (x86)/gfortran/bin
/../lib/gcc/i586-pc-mingw32/4.5.0 -Lc:/program files (x86)/gfortran/bin/../lib/g
cc -Lc:/program files (x86)/gfortran/bin/../lib/gcc/i586-pc-mingw32/4.5.0/../../
.. -lm t2dfort.o C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\telemac2d\hom
ere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\waqtel\homer
e_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\tomawac\homere
_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\sisyphe\homere_
telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\stbtel\homere_te
lemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\ad\homere_te
lemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\nestor\homere_tele
mac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\bief\homere_te
lemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\hermes\homer
e_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\parallel
\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\da
mocles\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\ut
ils\special\homere_telemac2d.lib -lgfortranbegin -lgfortran -lgomp -lpthread -lm
ingwthrd -lmingw32 -lgcc -lmoldname -lmingwex -lmsvcrt -luser32 -lkernel32 -ladv
api32 -lshell32 -lmingwthrd -lmingw32 -lgcc -lmoldname -lmingwex -lmsvcrt c:/pro
gram files (x86)/gfortran/bin/../lib/gcc/i586-pc-mingw32/4.5.0/crtend.o
c:/program files (x86)/gfortran/bin/../lib/gcc/i586-pc-mingw32/4.5.0/libgfortran
begin.a(fmain.o): In function `main':
C:\msys\home\FX\gfortran\ibin\i586-pc-mingw32\libgfortran/../../../gcc-trunk/lib
gfortran/fmain.c:21: undefined reference to `_MAIN__'
collect2: ld returned 1 exit status
runCAS: could not compile: t2d_malpasset.exe
|processExecutable: could not link your executable (runcode=1).
|
|... The following command failed for the reason above (or below)
|gfortran -fopenmp -fconvert=big-endian -frecord-marker=4 -v -lm -o t2d_malpa
sset.exe t2dfort.o C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\telemac2d\
homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\waqtel\ho
mere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\tomawac\hom
ere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\sisyphe\home
re_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\stbtel\homere
_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\ad\homere
_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\nestor\homere_t
elemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\bief\homere
_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\hermes\ho
mere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils\paral
lel\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib\utils
\damocles\homere_telemac2d.lib C:\opentelemac-mascaret\v7p2\builds\win7gfors\lib
\utils\special\homere_telemac2d.lib
|

C:\opentelemac-mascaret\v7p2>
I am sorry about my stupid question. What is problem with my telemac program?
You are very kind to quick comment on my issue.
looking for hearing your guidance
Best regards