open TELEMAC-MASCARET The mathematically superior suite of solvers

Hello,

tomawac_v6p1.exe exits in the folder C:\opentelemac\wintelmpi\tomawac\toma_v6p1\wintelmpi

My environment variables are :

Many thanks for spending your time helping me

Hi
In systel.ini, you have hostype=wintel32s and it seems you use wintelmpi.
Probably a problem linked to this difference...

hello

I reinstall all and it seems it worked better than before.
But I tried to launch a case in tomawac (th cas file was created with V6P0 dico). It return this :

Telemac System 5.6 to 6.1 - Perl scripts version 6.1
=========================================================
starting...

HOSTTYPE : wintelmpi
PROJECT : C:\opentelemac\wintelmpi
BASE DIRECTORY : C:\opentelemac\1an
LAUNCH DIRECTORY : C:\opentelemac\1an
WORK DIRECTORY : C:\opentelemac\1an\para1260348_tmp
PARAMETER FILE : para1260


*** Fichier de configuration SPECIFIQUE :
C:\opentelemac\wintelmpi\config\systel.ini ***



*** TOMAWAC sur STATION ***


*** Lancement en interactif ***


*** VERSION v6p1 ***

________________________________________________________
Fichier des parametres : para1260
________________________________________________________

________________________________________________________
Starting execution: tomawac.bat
________________________________________________________
______________________________________________________________________________
*** EXECUTABLE PAR DEFAUT ***

C:\opentelemac\wintelmpi\tomawac\toma_v6p1\wintelmpi\tomawacv6p1.exe
______________________________________________________________________________
*** ACQUISITION DES FICHIERS ***

- FICHIER DES PARAMETRES : para1260

- DICTIONNAIRE : tomawacv6p1.dico

- FICHIER DE GEOMETRIE : test
- FICHIER DES CONDITIONS AUX LIMITES : para_dec.conlim

______________________________________________________________________________
*** EXECUTION ***

---

---

TTTTT OOOOO M M AAAAA W W AAAAA CCCCC
T O O MM MM A A W W A A C
T O O M W M AAAAA W W W AAAAA C
T O O M M A A WW WW A A C
T OOOOO M M A A W W A A CCCCC


| | |
)_) )_) )_) _
)___))___))___)\
)____)____)_____)\\
_____|____|____|____\\\__

---

\ 6.1 /

---

^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^ ^^^^ ^^^ ^^
^^^^ ^^^




********************************************
* SOUS-PROGRAMME LECDON_TOMAWAC *
* APPEL DE DAMOCLES *
* VERIFICATION DES DONNEES LUES *
* SUR LE FICHIER CAS *
********************************************


OUVERTURE DES FICHIERS POUR TOMAWAC



*******************************
* CONSTRUCTION DES POINTEURS: *
*******************************



READGEO1 : TITRE= C:\telemac\bathymetrie\propagation.MAT


NOMBRE D'ELEMENTS: 128182
NOMBRE REEL DE POINTS: 64953
MXPTEL (BIEF) : NOMBRE MAXIMUM D'ELEMENTS VOISINS D'UN POINT : 8
NOMBRE MAXIMUM DE POINTS VOISINS D'UNPOINT : 8
CORRXY (BIEF) : PAS DE MODIFICATION DES COORDONNEES

MAILLAGE : MESH ALLOUE
forrtl: severe (157): Program Exception - access violation
Image PC Routine Line Source
out348_wintelmpi. 00EECB1F Unknown Unknown Unknown
out348_wintelmpi. 00F00C9A Unknown Unknown Unknown
out348_wintelmpi. 00EAEE35 Unknown Unknown Unknown
out348_wintelmpi. 00E8A155 Unknown Unknown Unknown
out348_wintelmpi. 0118D483 Unknown Unknown Unknown
out348_wintelmpi. 011696F8 Unknown Unknown Unknown
kernel32.dll 7710337A Unknown Unknown Unknown
ntdll.dll 77DB9ED2 Unknown Unknown Unknown
ntdll.dll 77DB9EA5 Unknown Unknown Unknown
Duree du calcul : 0 secondes ( 0:0:0 ) (systeme=0 sec)
______________________________________________________________________________
*** RESTITUTION DES FICHIERS ***

- FICHIER DES RESULTATS 2D : res1260

- res1260
- FICHIER DES RESULTATS PONCTUELS : spect

- spect

________________________________________________________
Execution terminee: tomawac.bat
________________________________________________________
No compilation/linking/file errors detected.
No execution errors detected.
'.' n'est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
## Error : System command failed for ./delete_para1260348.bat :256

do you know where the pb could be ?

Moreover I have a second problem, I don't manage to import the V6P1 dico in fudaa pre-processor to work with the keyword. Is it possible to work with fudaa with this version ?




## Error : System command failed for ./delete_para1260348.bat :256

Hard to say where the problem is.
access violation indicate a problem in memory organisation but where ...
Check if it works in scalar / parallel, on different computer...

For fudaa, you could download the latest version (on sourceforge) which manage the 6.1 version or you could also load a dictionary directly on the first windows when fudaa ask to choose the dictionary

Hope this helps

thanks for your answer, I will try it today

for fudaa, I have RC13 version and it doesn't work. When I go on the webside, it is said that RC13 is a 2010 release. Is it the latest version ??

thanks a lot !!

I reinstalled in scalar mode

Always the same problem... I think I will go back to V6P0 version
thanks a lot for your help

Hi

For Fudaa, there is a RC29 available on sourceforge.
I achieved the setup of telemac 6.1 for Windows with intel fortran for both 32 and 64 bits version but I'm waiting for a solution to upload it on the website.
If you want to test it before it will be available for download, I could place the setup file on a download place. I just need you email to send you the link

Regards

hello

I manage to run simulation with tomawac V6P1. I downloaded the new release of fudaa and created a cas file with V6P1 dico. It worked well. I will have to "convert" my old (V6P0) steering files because it still doesn't work with them.

Thanks again for your help. you deserve your champagne bottle