open TELEMAC-MASCARET The mathematically superior suite of solvers

Dear all,

as part of my first 3d Telemac model, I would like to use a swimming pool example with a length of 100m and width of 9m and a depth of 1m. the bottom of the pool has an elevation value of 1m and the water level should be at 2m.

At one end I will be prescribing a flowrate of 2 m^3/s with prescribed elevation of 1m. On the other end I will be prescribing a flowrate of -2 m^3/s and a prescribed elevation of 1.5m which should block the bottom half of the exit. The volume of water in the model is constant throughout the simulation as expected.

However, at the exit, the velocity is constant throughout regardless of depth and the water velocity is exiting from the bottom half of the pool where it should be blocked. I don't know if anyone was able to help me resolve this problem.

Many thanks

Paul