open TELEMAC-MASCARET The mathematically superior suite of solvers

Good afternoon,

I am modeling a channel and I entered a hydrograph (inflow) and a stage-discharge curve (outflow). But when I simulate the stage-dicharge curve file is not recognized, I get the following error.
THERE IS 2 LIQUID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 589 , WITH GLOBAL NUMBER: 5474
AND COORDINATES: 117.5000 0.000000
ENDS AT BOUNDARY POINT: 597 , WITH GLOBAL NUMBER: 5482
AND COORDINATES: 117.5000 1.500000

BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 1185 , WITH GLOBAL NUMBER: 9
AND COORDINATES: 0.000000 1.500000
ENDS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 1
AND COORDINATES: 0.000000 0.000000

THERE IS 2 SOLID BOUNDARIES:

BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 1
AND COORDINATES: 0.000000 0.000000
ENDS AT BOUNDARY POINT: 589 , WITH GLOBAL NUMBER: 5474
AND COORDINATES: 117.5000 0.000000

BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 597 , WITH GLOBAL NUMBER: 5482
AND COORDINATES: 117.5000 1.500000
ENDS AT BOUNDARY POINT: 1185 , WITH GLOBAL NUMBER: 9
AND COORDINATES: 0.000000 1.500000
ERROR IN THE STAGE-DISCHARGE CURVES FILE

PLANTE: PROGRAM STOPPED AFTER AN ERROR
RETURNING EXIT CODE: 2
_____________
runcode::main:
:
|runCode: Fail to run
|C:\opentelemac-mascaret\v7p2\00_Fondo_movil\EJEMPLO-3D-HYD-RATING\T3D_RC_curve.cas_2020-07-17-16h03min21s\out_telemac3d.exe
|~~~~~~~~~~~~~~~~~~
|STOP 1
|~~~~~~~~~~~~~~~~~~



I don't understand what the error is.

Someone could guide me.

Thank you.

The Hydrogram is:

#
# DEBIT A L'ENTREE ET SURFACE LIBRE A LA SORTIE
#
T Q(2)
s m3/s
0. 0.03
1000. 0.04
2500. 0.05

Hello,

Can you change the tabs in the STAGE-DISCHARGE CURVES FILE to spaces? It is recommended to ban tabs when using TELEMAC.

Hope this helps,

Chi-Tuan

I do it, but it does not change.

Hello,

Indeed, there were some fixes for this feature in 2D that were not changed in 3D.
Can you try to add the enclosed subroutine to a FORTRAN FILE directory please? The error message for STAGE-DISCHARGE CURVES FILE should disappear.

Hope this helps,

Chi-Tuan

the program read the stage-discharge curve but it doesn´t read the hydrogram.