open TELEMAC-MASCARET The mathematically superior suite of solvers

Hello,
I have installed fudaa- prepro 1.3 and everything seems ok, the graphical interface works, but when I launch an example of telemac, I launch the computation, it appears a dos window and disappear in 1 second. the computation finished, but the software doesn't create a file of results, not a .res file, just it creates a .fzip file and nothing else, everytime I launch an casual example.
What's wrong?
someone can help me please?

regards

S.

Hi
In fact, you probably obtain an error message in the dos windows but as it's immediatly close, you cannot read it.
Probably a problem of path variable...
In my opinion, you should use fudaa to create the steering file (eventually to manage boundary conditions and some spatial parameters (initial conditions, friction ...) and run the simulation manually

Regards

Thanks for the answer!
How can I create a steering file?When you say I should use fudaa you mean normal and not pre pro?

thanks

S.

ps I am interested in ARTEMIS module!
thank you

it works for all modules

In the fudaa prepro interface, from a geometry file, with a right click, you could select "create a telemac project" ...

Yes exactly, create a telemac project, but I have to put a steering file.Have you got an example?Cause I have just put usually a steering file from an example of telemac

NO, you have to give a name to the steering file but you could let the default value which is probably "cas"

I don't understand, Do I just change the name of a steering file that already exist?

Did you open a steering file or did you select a geometry file (mesh)?

1. On an empty directory, copy a mesh file
2. In FUDAA-PREPRO, on the same directory, select the geometry, then right click and "Create a telemac project"
3. Select the module (ARTEMIS?), let the other default values and validate

In the editor module, then you could create the boundary conditions and configure the computation with the dedicated keywords

Regards