Welcome, Guest
Username: Password: Remember me

TOPIC: Unable ti read the cmd header on the pmi context, Error = -1

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30760

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
Hi everyone,

I'm a new telemac2d user (V7P1R1).

I have some difficulties with an apparently very simple model. But I failed !

My CAS file is :

/
/------------------------------------------------------------------------------------------------------------
/                      ENVIRONNEMENT INFORMATIQUE
/------------------------------------------------------------------------------------------------------------
/
FICHIER DES CONDITIONS AUX LIMITES  : './BC_S1_ini.cli'
FICHIER DE GEOMETRIE                : './FOND_STB.geo'
FICHIER DES RESULTATS               : './ini.rep'
/
/------------------------------------------------------------------------------------------------------------
/                        OPTIONS GENERALES
/------------------------------------------------------------------------------------------------------------
/
/
VARIABLES POUR LES SORTIES GRAPHIQUES :'U,V,S,B,H,Q,M,L,W,F'
VARIABLES A IMPRIMER                  : ''
PAS DE TEMPS                          : 5
DUREE DU CALCUL                       : 20
PERIODE POUR LES SORTIES GRAPHIQUES   : 1
PERIODE DE SORTIE LISTING             : 1
/PROCESSEURS PARALLELES                : 8
NOMBRE MAXIMUM DE FRONTIERES        : 9000
/
/------------------------------------------------------------------------------------------------------------
/                    CONDITIONS INITIALES
/------------------------------------------------------------------------------------------------------------
/
/
CONDITIONS INITIALES : 'HAUTEUR NULLE'
/SUITE DE CALCUL                       : OUI
/REMISE A ZERO DU TEMPS                : OUI
/STRUCTURES VERTICALES                  : OUI
/
/------------------------------------------------------------------------------------------------------------
/                    CONDITIONS AUX LIMITES
/------------------------------------------------------------------------------------------------------------
/
LOI DE FROTTEMENT SUR LE FOND         : 3
COEFFICIENT DE FROTTEMENT             : 30
COTES IMPOSEES          : 297.2;260.3;206;201.5;0;0;0;0;255
COEFFICIENT DE DIFFUSION DES VITESSES             : 0.01
MODELE DE TURBULENCE                              : 1
/
/------------------------------------------------------------------------------------------------------------
/                       OPTIONS NUMERIQUES
/------------------------------------------------------------------------------------------------------------
/
BANCS DECOUVRANTS                                 : OUI
BILAN DE MASSE                                    : OUI
PRECISION DU SOLVEUR                              : 1.D-8
FORME DE LA CONVECTION                            : 1;5
SOLVEUR                                           : 1
MASS-LUMPING SUR H                                : 1
MASS-LUMPING SUR LA VITESSE                       : 1
TRAITEMENT DU SYSTEME LINEAIRE                    : 2
PROFILS DE VITESSE                                : 1
COMPATIBILITE DU GRADIENT DE SURFACE LIBRE        : 0.9
TRAITEMENT DES HAUTEURS NEGATIVES                 : 2
CORRECTION DE CONTINUITE                          : OUI
OPTION DE SUPG                                    : 0;0;0;0
MAXIMUM D'ITERATIONS POUR LE SOLVEUR              : 500
IMPLICITATION POUR LA VITESSE                     : 1
IMPLICITATION POUR LA HAUTEUR                     : 1




The end of my output Log is :


****************************************
                     * FIN DE L'ALLOCATION DE LA MEMOIRE  : *
                     ****************************************

 INBIEF (BIEF) : MACHINE NON VECTORIELLE (SELON VOS DONNEES)
 FONSTR : COEFFICIENTS DE FROTTEMENT LUS DANS
          LE FICHIER DE GEOMETRIE
 STRCHE (BIEF) : PAS DE MODIFICATION DU FROTTEMENT

 FRONT2 : DEPASSEMENT DE TABLEAUX
          AUGMENTER LE MOT-CLE
          NOMBRE MAXIMUM DE FRONTIERES
          DANS LE CODE APPELANT
          LA VALEUR ACTUELLE EST         9000

 PLANTE : ARRET DU PROGRAMME APRES ERREUR
 RETURNING EXIT CODE:            2
unable to read the cmd header on the pmi context, Error = -1
.
Error posting readv, Une connexion existante a dû être fermée par l’hôte distant.(10054)

job aborted:
rank: node: exit code[: error message]
0: Aix-P1085.ingerop.com: 1: process 0 exited without calling finalize

I don't understand why I have an error message.
NOMBRE MAXIMUM DE FRONTIERES -> It's the maximum number of boundaries. When I try to change the value in mas CAS file, it's not upload in the log ...


Please someone has an idea about how I can fix this problem ?

Thanks a lot,

Laurie
The administrator has disabled public write access.

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30762

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
As usual, when I finally post a message to ask some help, I find a solution.

I am almost ashamed of the solution. I think I got confused in the files ...

In short, I managed to change the maximum number of boundaries (NOMBRE MAXIMUM DE FRONTIERES : 9000 -> 91000) and that it is finally taken into account in the calculation. Everything works normally.

Thanks for the reactivity of the admins for the publication of my post.
The administrator has disabled public write access.

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30765

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
In fact, it seems I have a real problem.

My first message explain ma problem. I join a screen shot to illustrate the situation.

I really don't know how it's happened. But the value wrote in my CAS file is definitely diffent from the one is read by telemac ...

Have you an idea about how to fix this ?

Thanks !
Attachments:
The administrator has disabled public write access.

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30766

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
I tried to launch the calculation in a sequential way (not in parallel) :

FICHIER DES CONDITIONS AUX LIMITES  : './BC_S1.cli'
FICHIER DE GEOMETRIE                : './Drac_Complet_STB.geo'
FICHIER DES RESULTATS               : './RES_Test.res'
FICHIER DES FRONTIERES LIQUIDES     : './2400T_Q10_Complet.txt'
FICHIER DU CALCUL PRECEDENT         : './ini.rep'
FICHIER DES COURBES DE TARAGE       : './Barrage_StEg_ok.txt'
/FICHIER DES SECTIONS DE CONTROLE    : './controleG6.txt'
/FICHIER DE SORTIE DES SECTIONS DE CONTROLE : './resu.txt'
IMPRESSION DU CUMUL DES FLUX        : OUI
NOMBRE MAXIMUM DE FRONTIERES        : 92000
/FICHIER DE DONNEES DES BRECHES      : './breachG6.txt'
/
/------------------------------------------------------------------------------------------------------------
/                        OPTIONS GENERALES
/------------------------------------------------------------------------------------------------------------
/
/
VARIABLES POUR LES SORTIES GRAPHIQUES :'U,V,S,B,H,Q,
M,L,W,F,MAXV,MAXZ'
VARIABLES A IMPRIMER                  : ''
PAS DE TEMPS                          : 1.5
DUREE DU CALCUL                       : 250000
PERIODE POUR LES SORTIES GRAPHIQUES   : 600
PERIODE DE SORTIE LISTING             : 600
/PROCESSEURS PARALLELES                : 12
/


I get an other error :
READ_DATASET : LECTURE A L'ENREGISTREMENT     5

 TEMPS DE L'ENREGISTREMENT :     20.00000     S
 TEMPS ECOULE REMIS A ZERO

job aborted:
rank: node: exit code[: error message]
0: Aix-P1085.ingerop.com: 29: process 0 exited without calling finalize


--> What is it ?
The administrator has disabled public write access.

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30767

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
I desectivate the "breach" option. Now, it's ok in sequential mode.
But in parrallel mode, I get an other error :
 +-------------------------------------------------+
   PARTEL/PARRES: TELEMAC METISOLOGIC PARTITIONER
                                                    
   REBEKKA KOPMANN & JACEK A. JANKOWSKI (BAW)
                  JEAN-MICHEL HERVOUET (LNHE)
                  CHRISTOPHE DENIS     (SINETICS) 
                  YOANN AUDOUIN        (LNHE) 
   PARTEL (C) COPYRIGHT 2000-2002 
   BUNDESANSTALT FUER WASSERBAU, KARLSRUHE
  
   METIS 5.0.2 (C) COPYRIGHT 2012 
   REGENTS OF THE UNIVERSITY OF MINNESOTA 
  
   BIEF 7.1 (C) COPYRIGHT 2012 EDF
 +-------------------------------------------------+
  
  
   MAXIMUM NUMBER OF PARTITIONS:       100000
  
 +--------------------------------------------------+
  
 --INPUT FILE NAME <INPUT_NAME>: 
 INPUT: T2DGEO
 --INPUT FILE FORMAT <INPFORMAT> [MED,SERAFIN,SERAFIND]: 
  INPUT: SERAFIN 
 --BOUNDARY CONDITIONS FILE NAME: 
 INPUT: T2DCLI
--NUMBER OF PARTITIONS <NPARTS> [2 -100000]: 
  INPUT:           12
  PARTITIONING METHOD <PMETHOD>  [1 (METIS) OR 2 (SCOTCH)]: 
 --INPUT:            1
 --CONTROL SECTIONS FILE NAME (OR RETURN) : 
  NO SECTIONS 
 --CONTROL ZONES FILE NAME (OR RETURN) : 
  NO ZONES 
 --GEOMETRY FILE NAME <INPUT_NAME>: 
 INPUT: T2DGEO
 --GEOMETRY FILE FORMAT <GEOFORMAT> [MED,SERAFIN,SERAFIND]: 
  INPUT: SERAFIN 
 +---- PARTEL: BEGINNING -------------+


 READ_MESH_INFO: TITLE= newSelafin                                                              
            NUMBER OF ELEMENTS:  1266897
            NUMBER OF POINTS:   690952

            FORMAT NOT INDICATED IN TITLE
  
  
 ONE-LEVEL MESH.
 NDP NODES PER ELEMENT:                    3
 ELEMENT TYPE :                           10
 NPOIN NUMBER OF MESH NODES:          690952
 NELEM NUMBER OF MESH ELEMENTS:      1266897
  
 THE INPUT FILE ASSUMED TO BE 2D
 THERE ARE            1  TIME-DEPENDENT RECORDINGS
 FRONT2: SIZE OF ARRAYS EXCEEDED
         INCREASE THE KEYWORD
         MAXIMUM NUMBER OF BOUNDARIES
         IN THE CALLING PROGRAM
         THE CURRENT VALUE IS         9000



 PLANTE: PROGRAM STOPPED AFTER AN ERROR
 RETURNING EXIT CODE:            2


--> What is it ?
The administrator has disabled public write access.

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30768

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
In front2.f, the parameter concerned is MAXFRO.

The routine script that results from my problem is l.398 :

IF(LNG.EQ.2) THEN
WRITE(LU,*) 'FRONT2: SIZE OF ARRAYS EXCEEDED'
WRITE(LU,*) ' INCREASE THE KEYWORD'
WRITE(LU,*) ' MAXIMUM NUMBER OF BOUNDARIES'
WRITE(LU,*) ' IN THE CALLING PROGRAM'
WRITE(LU,*) ' THE CURRENT VALUE IS ',MAXFRO
ENDIF
CALL PLANTE(1)


But in my CAS file, MAXFRO = 92000 (I tried a lot of other values). But The value read still 9000 ...

Please, someone has an idea about this problem ?
The administrator has disabled public write access.

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30769

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
There is some topics like mine... but no solutions :/

www.openmascaret.org/index.php/community...vious-comp-file-v7-1
The administrator has disabled public write access.

Unable ti read the cmd header on the pmi context, Error = -1 6 years 4 months ago #30861

  • Laurie
  • Laurie's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 97
  • Thank you received: 5
The solution is presented in this topic :
opentelemac.org/index.php/kunena/16-tele...-parallel-mode#30860
The administrator has disabled public write access.
Moderators: pham

The open TELEMAC-MASCARET template for Joomla!2.5, the HTML 4 version.