open TELEMAC-MASCARET The mathematically superior suite of solvers

Hello everyone,

I'm working on telemac 2d, coupled with SISYPHE.
I'm trying to run a cas file with the VARIABLE FOR GRAPHIC PRINTOUT : QSBL and D50. These variables were working with the version v7p2r3 of telemac2d,and i'm currently working on CentOS 7.7, Gfortran 6.3.0 with intel mpi in dynamic.

I have this issue:

Traceback (most recent call last):
File "/softs/telemac-mascaret/trunk/scripts/python3/telemac2d.py", line 7, in <module>
main('telemac2d')
File "/softs/telemac-mascaret/trunk/scripts/python3/runcode.py", line 271, in main
run_study(cas_file, code_name, options)
File "/softs/telemac-mascaret/trunk/scripts/python3/execution/run_cas.py", line 154, in run_study
my_study = Study(steering_file, code_name, options.w_dir)
File "/softs/telemac-mascaret/trunk/scripts/python3/execution/study.py", line 100, in __init__
self.cas = TelemacCas(self.steering_file, self.dico_file)
File "/softs/telemac-mascaret/trunk/scripts/python3/execution/telemac_cas.py", line 81, in __init__
self._check_choix()
File "/softs/telemac-mascaret/trunk/scripts/python3/execution/telemac_cas.py", line 221, in _check_choix
raise TelemacException(
utils.exceptions.TelemacException: In Cas_Crue18_BAU.cas:
The value for VARIABLES FOR GRAPHIC PRINTOUTS (D50)is not among the choices:
{'U': 'vitesse suivant l axe des x (m/s)', 'V': 'vitesse suivant l axe des y (m/s)', 'C': 'celerite des ondes (m/s)', 'H': 'hauteur d eau (m)', 'S': 'cote de surface libre (m)', 'B': 'cote du fond (m)', 'F': 'nombre de Froude', 'Q': 'debit scalaire du fluide (m2/s)', 'Ti': 'traceur i etc.', 'T*': 'Tous les traceurs de 1 a 9.', 'T1*': 'Tous les traceurs 10 a 19.', 'K': 'energie turbulente du modele k-epsilon (J/kg)', 'E': 'dissipation de l energie turbulente (W/kg)', 'D': 'viscosite turbulente (m2/s)', 'I': 'debit suivant l axe des x (m2/s)', 'J': 'debit suivant l axe des y (m2/s)', 'M': 'vitesse scalaire (m/s)', 'X': 'vent suivant l axe des x (m/s)', 'Y': 'vent suivant l axe des y (m/s)', 'P': 'pression atmospherique (Pa)', 'W': 'coefficient de frottement sur le fond', 'A': 'derive en x (m)', 'G': 'derive en y (m)', 'L': 'nombre de Courant', 'N': 'variable supplementaire N', 'O': 'variable supplementaire O', 'R': 'variable supplementaire R', 'Z': 'variable supplementaire Z', 'MAXZ': 'cote maximum (m)', 'TMXZ': 'temps de la cote maximum (s)', 'MAXV': 'vitesse maximum (m/s)', 'TMXV': 'temps de la vitesse maximum (s)', 'US': 'vitesse de frottement (m/s)', 'G1': 'gradient 1, etc.', 'TAU_S': 'TAU_S', '1/R': '1/R (1/m)', 'OMEGA': 'OMEGA', 'WDIST': 'distance au mur le plus proche (m)', 'ZRL': 'niveau de reference pour Nestor (m)'}


Thank you in advance for your help and reply.

Yohan SOFYANE

Hi,

Could you post you steering files and what version of Telemac you are using ?

Hello Yohan,

You seem to try to ask for variables that can be written in a SISYPHE result file but in the TELEMAC-2D steering file. You have to put right choices in the right steering file if you want to write them.
This message means you try to ask a choice not available in the steering file.

Hope this helps,

Chi-Tuan