TELEMAC-MASCARET Forum: Dry nodes below reference water level (1/1)

Welcome, Guest

TOPIC: Dry nodes below reference water level

Dry nodes below reference water level 3 years 10 months ago #37614

Kurum
OFFLINE
Fresh Boarder
Posts: 23
Thank you received: 2

Hi all,

my model domain has a lot of nodes that sit below the reference level (e.g. 0 meter) but they are dry in reality. Once the model is initialized they get water since they are below zero. Is there anyway to assign each node their initial depths?
For instance, can I add the variable 'WATER DEPTH' to my geo slf file and set the below reference nodes to have zero depth?

I'd appreciate if you could let me know what the best practice is.
Cheers

The administrator has disabled public write access.

Dry nodes below reference water level 3 years 10 months ago #37617

pham OFFLINE Administrator Posts: 1559 Thank you received: 602	Hello Kurum, If you do not want to use a standard initial condition for water depth available by keywords, use the option INITIAL CONDITIONS = SPECIAL or PARTICULAR and write what you want in the USER_CONDIN_H subroutine. You can read the TELEMAC-2D user manual or have a look at TELEMAC-2D examples using this subroutine. Hope this helps, Chi-Tuan
	The administrator has disabled public write access.