TELEMAC-MASCARET Forum: Control Sections, only flows or other parameters available (1/1)

Welcome, Guest

TOPIC: Control Sections, only flows or other parameters available

Control Sections, only flows or other parameters available 3 years 9 months ago #37731

FREDERIC
OFFLINE
Fresh Boarder
Posts: 8

Hi

I am using control sections in Telemac 2D for river or rainfall floods.

I want to analyse the rating curve on each control section and it will be interesting for me to have other parameters as:
- Min, mean and max of water elevation on each control section (with a criteria on water depth, for example more than 50 cm)
- Min, mean and max of hydraulic head.

I just want to know if it is avalaible in telemac2d, if someone has done it or if it needs to be implemented.

Best regards
Frédéric

The administrator has disabled public write access.

Control Sections, only flows or other parameters available 3 years 9 months ago #37733

c.coulet
OFFLINE
Moderator
Posts: 3722
Thank you received: 1031

Hi Frederic
This is not available in the default version of Telemac2D.
I'm not aware this have already been done.
You could implement those options by modifying the sources...

By the way, if you doesnt want the result at each computational time step but only at the output time step, I think this could be also done by few adaptation of the numerous python scripts available for post-treatments. Have a look at the dedicated notebooks!

Hope this helps

Christophe

The administrator has disabled public write access.