Hi:
I'm not able to run a simple simulation because it keeps me telling:
ITERATION 0 TIME: 0.0000 S
LIT : READ ERROR
ONE INTENDED TO READ
A RECORD OF 1 VALUES
OF TYPE : CH
ON LOGICAL UNIT : 24
I don't know what I'm having this error if I'm not using any BINARY DATA FILE keyword in my steering file. Just in case this is my steering file:
/
/ EQUATIONS
/
FRICTION COEFFICIENT =0.0295
/
/ PHYSICAL PARAMETERS
/
LAW OF BOTTOM FRICTION =5
DIFFUSION OF VELOCITY =false
TURBULENCE MODEL =3
/
/ EQUATIONS, BOUNDARY CONDITIONS
/
VELOCITY PROFILES =1;1
PRESCRIBED FLOWRATES =0;59.6
PRESCRIBED ELEVATIONS =424.5;0
OPTION FOR LIQUID BOUNDARIES =1;1
/
/ EQUATIONS, INITIAL CONDITIONS
/
INITIAL ELEVATION =432.0
INITIAL CONDITIONS ='CONSTANT ELEVATION'
/
/ INPUT-OUTPUT, FILES
/
/
/
/ TELEMAC-2D - VALIDATION TEST CASE NUMBER 11 - 1 /
/ RIVER CONFLUENCE /
/
/
/ HP C3700 compilateur HP : 100 s version 5.7 20/04/2007
/ HP C3700 compilateur Nag : 236 s version 5.7 20/04/2007
/ Dell 2.8 MHz compilateur pgi : 59 s version 5.7 20/04/2007
/ HP C3700 compilateur HP : 90 s version 5.8 30/11/2007
/ HP C3700 compilateur Nag : 238 s version 5.8 26/12/2007
/ Dell 2.8 MHz compilateur pgi : 60 s version 5.8 19/12/2007
/ HP C3700 compilateur HP : 91 s version 5.9 16/10/2008
/ HP C3700 compilateur Nag : 238 s version 5.9 17/10/2008
/ Dell 2.8 MHz compilateur pgi : 57 s version 5.9 16/10/2008
/ WAVE EQUATION
/ HP C3700 compilateur HP : 24 s version 6.0 24/11/2009
/ HP C3700 compilateur Nag : 63 s version 6.0 27/11/2009
/ Dell 2.8 MHz compil. Intel : 11 s version 6.0 26/11/2009
/
/ COMPUTER INFORMATIONS
/
GEOMETRY FILE ='geo4'
STEERING FILE ='cas4.txt'
BOUNDARY CONDITIONS FILE ='cli4'
RESULTS FILE ='res'
/
/ INPUT-OUTPUT, GRAPHICS AND LISTING
/
LISTING PRINTOUT PERIOD =100
INFORMATION ABOUT SOLVER =false
GRAPHIC PRINTOUT PERIOD =100
VARIABLES FOR GRAPHIC PRINTOUTS ='U,V,H,S,B,US,E,K,F'
MASS-BALANCE =YES
/
/ INPUT-OUTPUT, INFORMATION
/
VALIDATION =NO
/
/ NUMERICAL PARAMETERS
/
PARALLEL PROCESSORS =0
NUMBER OF TIME STEPS =7200
TREATMENT OF THE LINEAR SYSTEM =2
WAVE DRIVEN CURRENTS =true
SUPG OPTION =2;2
TIME STEP =1.0
/
/ NUMERICAL PARAMETERS
/
TYPE OF ADVECTION =1;5
/
/ NUMERICAL PARAMETERS, SOLVER
/
SOLVER =1
SOLVER OPTION =3
/
/ NUMERICAL PARAMETERS, VELOCITY-CELERITY-HIGHT
/
IMPLICITATION FOR DEPTH =0.6
H CLIPPING =NO
IMPLICITATION FOR VELOCITY =0.6
MASS-LUMPING ON H =1
Thank you in advance for your help,
Christian
