Hi,
I am running a simple model in Telemac 2d with no subroutines where I have a channel flow with closed boundaries on each side and open boundaries at either end with prescribed elevations of 10 and 9.75 respectively, these are defined in the steering file. For some reason when I run the simulation it gets to iteration 0, then stops, and I am unable to type anything in the cmd window, as shown below:
C:\opentelemac\Practise\Practise5\Telemac files>runcode.py telemac2d -s Steering
.txt
Loading Options and Configurations
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
... parsing configuration file: c:\opentelemac\v6p2r2\config\systel.cfg
Running your CAS file for:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+> configuration: wintel
+> root: C:\opentelemac\v6p2r2\
+> version v6p2
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Running Steering.txt with telemac2d under C:\opentelemac\Practise\Practise5\Tele
mac files
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
... reading module dictionary
... running in English with Steering.txt
re-writing: C:\opentelemac\Practise\Practise5\Telemac files\Steering.txt_2013-
05-21-12h20min20s\T2DCAS
copying: Boundaryconditions.cli C:\opentelemac\Practise\Practise5\Telemac f
iles\Steering.txt_2013-05-21-12h20min20s\T2DCLI
copying: Geometry.slf C:\opentelemac\Practise\Practise5\Telemac files\Steer
ing.txt_2013-05-21-12h20min20s\T2DGEO
copying: telemac2dv6p2.dico C:\opentelemac\Practise\Practise5\Telemac files
\Steering.txt_2013-05-21-12h20min20s\T2DDICO
Running your simulation :
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
C:\opentelemac\Practise\Practise5\Telemac files\Steering.txt_2013-05-21-12h20min
20s\out_telemac2dv6p2.exe
LISTING OF TELEMAC-2D
TTTTT EEEEE L EEEEE M M AAAAA CCCCC
T E L E MM MM A A C
T EEE L EEE M M M AAAAA C
T E L E M M A A C
T EEEEE LLLLL EEEEE M M A A CCCCC
2D VERSION 6.2 FORTRAN 90
WITH SEVERAL TRACERS
COUPLED WITH SISYPHE AND TOMAWAC
********************************************
* LECDON: *
* AFTER CALLING DAMOCLES *
* CHECKING OF DATA READ *
* IN THE STEERING FILE *
********************************************
EXITING LECDON. NAME OF THE STUDY:
FinalHydroRuns
OPENING FILES FOR TELEMAC2D
*****************************
* MEMORY ORGANIZATION *
*****************************
READGEO1: TITLE= newSelafin
NUMBER OF ELEMENTS: 17359
NUMBER OF POINTS: 8907
MXPTEL (BIEF) : MAXIMUM NUMBER OF ELEMENTS AROUND A POINT: 8
MAXIMUM NUMBER OF POINTS AROUND A POINT: 8
CORRXY (BIEF):NO MODIFICATION OF COORDINATES
MESH: MESH ALLOCATED
*************************************
* END OF MEMORY ORGANIZATION: *
*************************************
INBIEF (BIEF): NOT A VECTOR MACHINE (ACCORDING TO YOUR DATA)
FONSTR (BIEF): NO BATHYMETRY IN THE GEOMETRY FILE
AND NO BATHYMETRY FILE. THE BOTTOM
LEVEL IS FIXED TO ZERO BUT STILL
CAN BE MODIFIED IN CORFON.
STRCHE (BIEF): NO MODIFICATION OF FRICTION
THERE IS 2 LIQUID BOUNDARIES:
BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 207 , WITH GLOBAL NUMBER: 8887
AND COORDINATES: 200.0000 0.4000000
ENDS AT BOUNDARY POINT: 227 , WITH GLOBAL NUMBER: 8907
AND COORDINATES: 200.0000 19.60000
BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 433 , WITH GLOBAL NUMBER: 21
AND COORDINATES: 0.000000 20.00000
ENDS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 22
AND COORDINATES: 0.000000 0.000000
THERE IS 2 SOLID BOUNDARIES:
BOUNDARY 1 :
BEGINS AT BOUNDARY POINT: 1 , WITH GLOBAL NUMBER: 22
AND COORDINATES: 0.000000 0.000000
ENDS AT BOUNDARY POINT: 207 , WITH GLOBAL NUMBER: 8887
AND COORDINATES: 200.0000 0.4000000
BOUNDARY 2 :
BEGINS AT BOUNDARY POINT: 227 , WITH GLOBAL NUMBER: 8907
AND COORDINATES: 200.0000 19.60000
ENDS AT BOUNDARY POINT: 433 , WITH GLOBAL NUMBER: 21
AND COORDINATES: 0.000000 20.00000
CORFON (TELEMAC2D): NO MODIFICATION OF BOTTOM
================================================================================
ITERATION 0 TIME: 0.0000 S
USING STREAMLINE VERSION 6.2 FOR CHARACTERISTICS
Any help on why this is happening would be greatly appreciated.
Cheers
Danny
