open TELEMAC-MASCARET The mathematically superior suite of solvers

Hi all,
I am getting the following error while giving LIQUID BOUNDARIES FILE in the sisyphe .cas file. Herewith I have given my .cas files, liquid boundaries file and the error message for your refrence. Please hlep me to resolve the issue.

I created two liquid boundaries file. one for discharge data, given in the telemac .cas file and another for sediment data, given in sisyphe .cas file. Is that correct?


Thanks in advance.

Hello,

Can you try to replace horizontal tabs by spaces in the sediment.txt file.

Anyway, FYI, you should switch to GAIA as SISYPHE has been removed from the TELEMAC-MASCARET system and there is no assistance for SISYPHE anymore.

Hope this helps,

Chi-Tuan

Thank you for the reply. The correction you suggested is working fine. But the model is not taking values from the liquid boundaries file. In the liquid boundaries file the values are written in g/lit. But the model is running in m3/s.

also after the first timestep the sediment input from the second boundary is 0.00.

Can you help me to resolve this issue?

Hello,

It seems to be a SISYPHE issue and already told, I cannot help.

What I can advise is to carefully read the manuals and if this issue already appeared in the forum by using the search engine of this forum.

My feeling is that your LIQUID BOUNDARIES FILE for SISYPHE is not at the expected format (be careful with the headlines).

Hope this helps,

Chi-Tuan