TELEMAC-MASCARET Forum: Errors on the river_sediment transport model (1/1)

Welcome, Guest

TOPIC: Errors on the river_sediment transport model

Errors on the river_sediment transport model 10 years 9 months ago #11820

harryyao
OFFLINE
Expert Boarder
Posts: 190
Thank you received: 3

Dear all,

I try to runing the simulation with Telemac2d/SISYPHE. I used the mesh generated by SMS and import to BlueKenue. I set the inlet with the flow rate, and outlet with elelation. and the other parameters are also right.

But there have errors when I do the calculation.

Is it anybody could testing this case and let me know it is the problem only in my computer or not?? many thanks in advance.

File Attachment:

File Name: h7ae07db.rar
File Size: 209 KB

The administrator has disabled public write access.

Errors on the river_sediment transport model 10 years 9 months ago #11827

harryyao OFFLINE Expert Boarder Posts: 190 Thank you received: 3	I am not sure there is a problem on mesh or not.
	The administrator has disabled public write access.

Errors on the river_sediment transport model 10 years 9 months ago #11837

harryyao OFFLINE Expert Boarder Posts: 190 Thank you received: 3	It is show that the problem on boundary number, in the boundary condition file or check the water depths
	The administrator has disabled public write access.

Errors on the river_sediment transport model 10 years 9 months ago #11838

ewang OFFLINE Senior Boarder Posts: 100	can you post your steering file? what's your initial elevation?
	The administrator has disabled public write access.

Errors on the river_sediment transport model 10 years 9 months ago #11841

Pablo OFFLINE Moderator Posts: 316 Thank you received: 121	Hello, please check: (1) if the hydrodynamics is correctly solved by the model (only telemac-2d, not coupling) (2) if the boundary conditions are correctly imposed If points (1) and (2) are OK, then move to the morphodynamics simulation. I hope it helps, Pablo
	The administrator has disabled public write access.

Errors on the river_sediment transport model 10 years 9 months ago #11851

harryyao OFFLINE Expert Boarder Posts: 190 Thank you received: 3	the model is working new, but with high unaccurate results. both the steering file and geometry file are post in here. For the SISYPHE model, Actually, I want to use 3 sediment diameter according to the grading curve, 0.02mm, 1mm, 2mm, and the volume of it is 30%, 30%, and 40% respectively. It is would be still a long way to go .. File Attachment: File Name: h1926702.rar File Size: 37 KB
	The administrator has disabled public write access.