TELEMAC-MASCARET Forum: Running Simulation on Both PC and Cluster (1/1)

Welcome, Guest

TOPIC: Running Simulation on Both PC and Cluster

Running Simulation on Both PC and Cluster 12 years 9 months ago #3643

qilong
OFFLINE
Expert Boarder
Posts: 340
Thank you received: 33

Hello,

I'm trying to run the same simulation on both PC and Cluster (with 1 processor). But the model worked on my PC but didn't work on the cluster.

I got errors from the cluster like:

ELEBD: ERROR OF NUMBERING IN THE ELEMENT: 72902
POSSIBLE REASON:
THE BOUNDARY CONDITION FILE IS NOT
RELEVANT TO THE GEOMETRY FILE

But it was OK in my PC. What's wrong with this? Does it have something to do with the systel.ini? Thanks in advance!

Attachments:

systel.txt (5KB)

The administrator has disabled public write access.

Re: Running Simulation on Both PC and Cluster 12 years 9 months ago #3644

sebourban OFFLINE Administrator Principal Scientist Posts: 814 Thank you received: 219	This looks like a dos-2-unix conversion missing -- could that be the case ? Sébastien.
	The administrator has disabled public write access.

Re: Running Simulation on Both PC and Cluster 12 years 9 months ago #3645

qilong OFFLINE Expert Boarder Posts: 340 Thank you received: 33	Do you mean I should convert all the input files to unix format by using dos2unix command?
	The administrator has disabled public write access.

Re: Running Simulation on Both PC and Cluster 12 years 9 months ago #3646

qilong
OFFLINE
Expert Boarder
Posts: 340
Thank you received: 33

I converted all the input files into Unix format. After that I still got errors like:

PLANTE : ARRET DU PROGRAMME APRES ERREUR
RETURNING EXIT CODE: 2
0.01user 0.00system 0:00.01elapsed 84%CPU (0avgtext+0avgdata 11472maxresident)k
0inputs+0outputs (0major+779minor)pagefaults 0swaps
Duration of job : 0 seconds ( 0:0:0 ) (system=0 sec)

I also tried to keep the slf format unchanged and just converted other files. It didn't work. The error was the same as before.

The administrator has disabled public write access.

Re: Running Simulation on Both PC and Cluster 12 years 9 months ago #3648

sebourban OFFLINE Administrator Principal Scientist Posts: 814 Thank you received: 219	Only the ASCII files should be converted to unix. The BINARY files should not -- that include the GEO file. If that does not work, it may mean that the CONLIM file is not in phase with your GEO file, and I would advise you to re-create your CONLIM file (using Blue Kenue for instance). Hope this helps. Sébastien
	The administrator has disabled public write access. The following user(s) said Thank You: qilong

Re: Running Simulation on Both PC and Cluster 12 years 9 months ago #3652

qilong OFFLINE Expert Boarder Posts: 340 Thank you received: 33	Thanks Sébastien! I'll try to regenerate the COMLIM file and run it again.
	The administrator has disabled public write access.

Re: Running Simulation on Both PC and Cluster 12 years 9 months ago #3677

c.coulet
OFFLINE
Moderator
Posts: 3722
Thank you received: 1031

Hi

I've already seen some cases where the COMLIM file is quiet big giving such results due to a problem during the transfer between PC and linux cluster. the transfer was made in ASCII mode (using SSH secure shell) and there was a bug in the middle of the conlim file which generate the telemac crash.
Solution: made the transfer in BINARY mode and eventuelly convert the file on the cluster fromdos or dos2unix

Hope this helps

Christophe

The administrator has disabled public write access.

Re: Running Simulation on Both PC and Cluster 12 years 9 months ago #3678

qilong OFFLINE Expert Boarder Posts: 340 Thank you received: 33	Thanks Christophe! That makes sense. I'll try to made the transfer in BINARY mode and convert the ASCII files after then.
	The administrator has disabled public write access.