open TELEMAC-MASCARET The mathematically superior suite of solvers

I ran several simulations on Artemis to simulate the wave height in a specific bay. I had plenty of scenarios according directions and significant waves.
I figured out that, when the interval of the period is too important and the significant height too low, there is no wave height calculated in the domain.


I attached a screen that shows the result of a simulation where the wave height is around 0.7m (at the liquid boundaries) and the period goes from 3s to 6s, centered on the peak period (4.5s).
Is this problem linked to the relation between the mesh size and the wave length ?

Thank you for your attention, Julien.

Hi
Looks like a NAN results.
Could you join the computation listing or the files in order to let us see the run...

Regards

Here are all the files I used for this simulation.
geo and result files are too big, i could upload them if you need.

Regards, Julien.

Hi,

I wanted to add some details about my problem.
If I run a simulation with the parameters I mentioned in my previous messages, I obtain NaN results.
But if I set up the peak period at 6.1s and the minimum spectral period at 6s, I got results.

As said, I think that the problem is linked to the relation between the mesh size and the wave length but I can't understand my problem because it should work. Does someone have a explanation ?

Here is a link of the geo file if you want to check the mesh size.
drive.google.com/open?id=1ds-WZwoFLjrnxTsdfGnLyaKepit4btpL

Thanks for your attention, Julien.

Hi,

Sorry to re-up this topic.
Did anyone have a solution for me ?

Simulations file are available in the previous messages.

Thanks for your attention, Julien.