TELEMAC-MASCARET Forum: QGis and TELEMAC3D (1/1)

QGis and TELEMAC3D 1 year 7 months ago #42320

Nfremy OFFLINE Fresh Boarder Posts: 6	Hello Do you know if we can insert results of TELEMAC3D in QGis. It seems that it's possible with the plugin PostTelemac version v2.0 but I don't find this version of this plugin in the extension of QGis (version 3.16). Thanks
	The administrator has disabled public write access.

c.coulet OFFLINE Moderator Posts: 3722 Thank you received: 1031	Hi This plugin is no longer maintained But you normally should be able to directly open selafin results as mesh data in Qgis as this format is supported. By the way, I don't know how the 3D results are managed
	Christophe The administrator has disabled public write access.

Nfremy OFFLINE Fresh Boarder Posts: 6	Thank you for this information. Effectively, I can directly open selafin results. For 3D results, there is one QGIs layer for each time step, and in each QGis layer, there is the results for all depth layers.
	The administrator has disabled public write access.

Hi,

Latest version of PostTelemac is 1.2.1 and is available for Qgis 3.16 and above : plugins.qgis.org/plugins/PostTelemac/version/1.2.1/

Even if no longer maintained, I use it almost every day and most of features still work on QGIS 3.30.

Mesh have greatly improved since QGIS 3.16, you should consider upgrading your QGIS version.
Documentation : docs.qgis.org/3.28/en/docs/user_manual/w...mesh_properties.html

Regards

The administrator has disabled public write access.

jurjendejong OFFLINE Fresh Boarder Posts: 27 Thank you received: 12	Reading this I get the impression that a 3D Selafin file is working in QGIS? I did not manage to get that working with neither the Mesh-layer functionality, nor the PostTelemac plugin. Did I misinterpret that you are talking about 3D Selafin files?
	The administrator has disabled public write access.

nicogodet OFFLINE Expert Boarder Posts: 157 Thank you received: 39	Could you provide a sample ? I will give it a try
	The administrator has disabled public write access.

jurjendejong OFFLINE Fresh Boarder Posts: 27 Thank you received: 12	Sure! Here is the output from example telemac3d/stratif_wind: www.dropbox.com/s/zq9l3e78rukn2ug/r3d_stratif_wind.slf?dl=0
	The administrator has disabled public write access.

nicogodet OFFLINE Expert Boarder Posts: 157 Thank you received: 39	Yup, have an error with both MDAL (QGIS) and PostTelemac (and as said above, it's not maintained any longer). Nfremy may have open the result file via drag and drop on QGIS and select polygon. Which is equivalent to open the selafin file with GDAL and not MDAL. 3D SELAFIN might not be supported at the moment.
	The administrator has disabled public write access.

jurjendejong OFFLINE Fresh Boarder Posts: 27 Thank you received: 12	Oke, that's what I thought. Thanks for checking!
	The administrator has disabled public write access.

Nfremy OFFLINE Fresh Boarder Posts: 6	Hello Yes, we usually use the version 1.2.1 of PostTelemac on QGis v3.16, but it doesn't read the results files of TELEMAC3D. And yes, I have opened the results file via drag and drop on QGIS, and I have selected the points layers. And it's OK with results files of TELEMAC3D.
	The administrator has disabled public write access.